.. We use docutils to produce the documentation. Docstrings are extracted .. with pure-doc. Please see the pure-doc documentation for details. .. This module is always the first in the library docs, so produce the .. title here. =================== Pure Library Manual =================== .. role:: dfn(strong) .. default-role:: dfn .. default-domain:: pure .. |GPL| replace:: GNU General Public License .. |FDL| replace:: GNU Free Documentation License .. _FDL: http://www.gnu.org/copyleft/fdl.html .. _GPL: http://www.gnu.org/copyleft/gpl.html Version 0.68, |today| Albert Gräf Copyright (c) 2009-2017 by Albert Gräf. This document is available under the |FDL|_. This manual describes the operations in the standard Pure library, including the prelude and the other library modules which come bundled with the interpreter. There is a companion to this manual, :doc:`pure` which describes the Pure language and the operation of the Pure interpreter. .. Table of contents, switch on section numbering. .. only:: html .. contents:: :local: .. _Prelude: Prelude ======= The prelude defines the basic operations of the Pure language. This includes the basic arithmetic and logical operations, string, list and matrix functions, as well as the support operations required to implement list and matrix comprehensions. The string, matrix and record operations are in separate modules strings.pure, matrices.pure and records.pure, the primitive arithmetic and logical operations can be found in primitives.pure. Note that since the prelude module gets imported automatically (unless the interpreter is invoked with the ``--no-prelude`` option), all operations discussed in this section are normally available in Pure programs without requiring any explicit import declarations, unless explicitly noted otherwise. Constants and Operators ----------------------- The prelude also declares a signature of commonly used constant and operator symbols. This includes the truth values ``true`` and ``false``. .. constant:: true = 1 false = 0 These are actually just integers in Pure, but sometimes it's convenient to refer to them using these symbolic constants. In addition, the following special exception symbols are provided: .. constructor:: failed_cond failed_match stack_fault malloc_error These are the built-in exception values. ``failed_cond`` denotes a failed conditional in guard or if-then-else; ``failed_match`` signals a failed pattern match in lambda, ``case`` expression, etc.; ``stack_fault`` means not enough stack space (``PURE_STACK`` limit exceeded); and ``malloc_error`` indicates a memory allocation error. .. constructor:: bad_list_value x bad_tuple_value x bad_string_value x bad_matrix_value x These denote value mismatches a.k.a. dynamic typing errors. They are thrown by some operations when they fail to find an expected value of the corresponding type. .. constructor:: out_of_bounds This exception is thrown by the index operator ``!`` if a list, tuple or matrix index is out of bounds. .. index:: operators .. _operators: Here's the list of predefined operator symbols. Note that the parser will automagically give unary minus the same precedence level as the corresponding binary operator. :: infixl 1000 $$ ; // sequence operator infixr 1100 $ ; // right-associative application infixr 1200 , ; // pair (tuple) infix 1300 => ; // key=>value pairs ("hash rocket") infix 1400 .. ; // arithmetic sequences infixr 1500 || ; // logical or (short-circuit) infixr 1600 && ; // logical and (short-circuit) prefix 1700 ~ ; // logical negation infix 1800 < > <= >= == ~= ; // relations infix 1800 === ~== ; // syntactic equality infixr 1900 : ; // list cons infix 2000 +: <: ; // complex numbers (cf. math.pure) infixl 2100 << >> ; // bit shifts infixl 2200 + - or ; // addition, bitwise or infixl 2300 * / div mod and ; // multiplication, bitwise and infixl 2300 % ; // exact division (cf. math.pure) prefix 2400 not ; // bitwise not infixr 2500 ^ ; // exponentiation prefix 2600 # ; // size operator infixl 2700 ! !! ; // indexing, slicing infixr 2800 . ; // function composition prefix 2900 ' ; // quote postfix 3000 & ; // thunk .. _Prelude Types: Prelude Types ------------- Some additional type symbols are provided which can be used as type tags on the left-hand side of equations, see :ref:`Type Tags` in the Pure Manual. .. type:: number /type complex /type real /type rational /type integer /type bool /type Additional number types. These types are defined in a purely syntactic way, by checking the builtin-type or the constructor symbol of a number. Some semantic number types can be found in the :mod:`math` module, see `Semantic Number Predicates and Types`_. :type:`integer/type` is the union of Pure's built-in integer types, i.e., it comprises all :type:`int/type` and :type:`bigint/type` values. :type:`bool/type` is a subtype of :type:`int/type` which denotes just the normalized truth values ``0`` and ``1`` (a.k.a. :const:`false` and :const:`true`). :type:`rational/type` and :type:`complex/type` are the rational and complex types, while :type:`real/type` is the union of the :type:`double/type`, :type:`integer/type` and :type:`rational/type` types (i.e., anything that can represent a real number and be used for the real and imaginary parts of a :type:`complex/type` number). Finally, :type:`number/type` is the union of all numeric types, i.e., this type can be used to match any kind of number. Note that the operations of the :type:`rational/type` and :type:`complex/type` types are actually defined in the :mod:`math` module which isn't part of the prelude, so you have to import this module in order to do computations with these types of values. However, the type tags and constructors for these types are defined in the prelude so that these kinds of values can be parsed and recognized without having the :mod:`math` module loaded. The prelude also provides a subtype of the built-in :type:`string/type` type which represents single-character strings: .. type:: char /type A single character string. This matches any string value of length 1. `Lists and tuples`_ can be matched with the following types: .. type:: list /type rlist /type The list and "proper" (or "recursive") list types. Note that the former comprises both the empty list ``[]`` and all list nodes of the form ``x:xs`` (no matter whether the tail ``xs`` is a proper list value or not), whereas the latter only matches proper list values of the form ``x1:...:xn:[]``. Thus the :type:`list/type` type can be checked in O(1) time, while the :type:`rlist/type` type is defined recursively and requires linear time (with respect to the size of the list) to be checked. This should be considered when deciding whether to use one or the other in a given situation; see :ref:`Type Rules` for further explanation. .. type:: tuple /type The type of all tuples, comprises the empty tuple ``()`` and all tuples ``(x,xs)`` with at least two members. This is analogous to the :type:`list/type` type above, but no "proper" tuple type is needed here since any tuple of this form is always a proper tuple. There are some other, more specialized types representing various kinds of applications, function objects and other named entities. These are useful, in particular, for the definition of higher-order functions and for performing symbolic manipulations on unevaluated symbolic terms. .. type:: appl /type This type represents all unevaluated function or constructor applications of the form ``x y``. This comprises constructor terms and quoted or partial function applications. .. type:: function /type This type represents any term which may be called as a function. This may be a closure (global or local function, or a lambda function) which takes at least one argument, or a partial application of a closure to some arguments which is still "unsaturated", i.e., expects some further arguments to be "ready to go". .. type:: fun /type A named function object (global or local function, but not a partial application). .. type:: lambda /type An anonymous (lambda) function. .. type:: closure /type Any kind of function object (named function or lambda). This is the union of the :type:`fun/type` and :type:`lambda/type` types. .. type:: thunk /type This is a special kind of unevaluated parameterless function object used in lazy evaluation. See :ref:`Lazy Evaluation and Streams` in the Pure Manual. .. type:: var /type A free variable. This can be any kind of symbol that could in principle be bound to a value (excluding operator and nonfix symbols). .. type:: symbol /type Any kind of symbol (this also includes operator and nonfix symbols). Corresponding type predicates are provided for all of the above, see Predicates_. Some further types and predicates for matrices and records can be found under `Matrix Inspection and Manipulation`_ and `Record Functions`_. Basic Combinators ----------------- .. index:: combinators The prelude implements the following important function combinators. .. function:: infix $ f g infix . f g Like in Haskell, these denote right-associative application and function composition. They are also defined as macros so that saturated calls of them are eliminated automatically. Examples:: > foo $ bar 99; foo (bar 99) > (foo.bar) 99; foo (bar 99) .. function:: id x cst x y These are the customary identity and constant combinators from the combinatorial calculus:: > map id (1..5); [1,2,3,4,5] > map (cst 0) (1..5); [0,0,0,0,0] .. function:: void x This combinator is basically equivalent to ``cst ()``, but with the special twist that it is also defined as a macro optimizing the case of "throwaway" list and matrix comprehensions. This is useful if a comprehension is evaluated solely for its side effects. E.g.:: > using system; > extern int rand(); > foo = void [printf "%d\n" rand | _ = 1..3]; > show foo foo = do (\_ -> printf "%d\n" rand) (1..3); > foo; 1714636915 1957747793 424238335 () Note that the above list comprehension is actually implemented using :func:`do` (instead of :func:`map`, which would normally be the case), so that the intermediate list value of the comprehension is never constructed. This is described in more detail in section :ref:`Optimization Rules` of the Pure Manual. .. In addition, the prelude also provides the following combinators adopted from Haskell: .. function:: flip f Swaps arguments of a binary function ``f``, e.g.:: > map (flip (/) 2) (1..3); [0.5,1.0,1.5] This combinator is also used by the compiler to implement right operator sections, which allows you to write the above simply as:: > map (/2) (1..3); [0.5,1.0,1.5] .. function:: curry f Turns a function ``f`` expecting a pair of values into a curried function of two arguments:: > using system; > dowith (curry (printf "%d: %g\n")) (0..2) [0.0,2.718,3.14]; 0: 0 1: 2.718 2: 3.14 () .. function:: uncurry f The inverse of :func:`curry`. Turns a curried function ``f`` expecting two arguments into a function processing a single pair argument:: > map (uncurry (*)) [(2,3),(4,5),(6,7)]; [6,20,42] .. function:: curry3 f uncurry3 f These work analogously, but are used to convert between ternary curried functions and functions operating on triples. .. function:: fix f This is the (normal order) fixed point combinator which allows you to create recursive anonymous functions. It takes another function ``f`` as its argument and applies ``f`` to ``fix f`` itself:: > let fact = fix (\f n -> if n<=0 then 1 else n*f (n-1)); > map fact (1..5); [1,2,6,24,120] See |fixpoint|_ at Wikipedia for an explanation of how this magic works. Just like in Haskell, :func:`fix` can be used to produce least fixed points of arbitrary functions. For instance:: > fix (cst bar); bar > let xs = fix (1:); > xs; 1:# > xs!!(0..10); [1,1,1,1,1,1,1,1,1,1,1] .. |fixpoint| replace:: Fixed point combinator .. _fixpoint: http://en.wikipedia.org/wiki/Fixed_point_combinator .. Lists and Tuples ---------------- .. index:: lists .. index:: tuples The prelude defines the list and tuple constructors, as well as equality and inequality on these structures. It also provides a number of other useful basic operations on lists and tuples. These are all described below. .. constructor:: [] () Empty list and tuple. .. constructor:: infix : x y infix , x y List and tuple constructors. These are right-associative in Pure. Lists are the usual right-recursive aggregates of the form ``x:xs``, where ``x`` denotes the `head` and ``xs`` the `tail` of the list, pretty much the same as in Lisp or Prolog except that they use a Haskell-like syntax. In contrast to Haskell, list concatenation is denoted '\ :func:`+/list`\ ' (see below), and lists may contain an arbitrary mixture of arguments, i.e., they are fully polymorphic:: > 1:2:3:[]; [1,2,3] > [1,2,3]+[u,v,w]+[3.14]; [1,2,3,u,v,w,3.14] Lists are `eager` in Pure by default, but they can also be made `lazy` (in the latter case they are also called `streams`). This is accomplished by turning the tail of a list into a "thunk" (a.k.a. "future") which defers evaluation until the list tail is actually needed, see section :ref:`Lazy Evaluation and Streams` in the Pure Manual. For instance, an infinite arithmetic sequence (see below) will always produce a list with a thunked tail:: > 1:3..inf; 1:# Pure also distinguishes `proper` and `improper` lists. The former are always terminated by an empty list in the final tail and can thus be written using the conventional ``[x1,x2,...,xn]`` syntax:: > 1:2:3:[]; [1,2,3] In contrast, improper lists are terminated with a non-list value and can only be represented using the '\ :func:`:`\ ' operator:: > 1:2:3; 1:2:3 These aren't of much use as ordinary list values, but are frequently encountered as patterns on the left-hand side of an equation, where the final tail is usually a variable. Also note that technically, a lazy list is also an improper list (although it may expand to a proper list value as it is traversed). Tuples work in a similar fashion, but with the special twist that the pairing constructor '\ :cons:`,`\ ' is associative (it always produces right-recursive pairs) and '\ :cons:`()`\ ' acts as a neutral element on these constructs, so that '\ :cons:`,`\ ' and '\ :cons:`()`\ ' define a complete monoid structure. Note that this means that '\ :cons:`,`\ ' is actually a "constructor with equations" since it obeys the laws ``(x,y),z == x,(y,z)`` and ``(),x == x,() == x``. Also note that there isn't a separate operation for concatenating tuples, since the pairing operator already does this:: > (1,2,3),(10,9,8); 1,2,3,10,9,8 > (),(a,b,c); a,b,c > (a,b,c),(); a,b,c This also implies that tuples are always flat in Pure and can't be nested; if you need this, you should use lists instead. Also, tuples are always eager in Pure. Some important basic operations on lists and tuples are listed below. .. index:: list; concatenation .. function:: infix + /list x y List concatenation. This non-destructively appends the elements of ``y`` to ``x``. :: > [1,2,3]+[u,v,w]; [1,2,3,u,v,w] Note that this operation in fact just recurses into ``x`` and replaces the empty list marking the "end" of ``x`` with ``y``, as if defined by the following equations (however, the prelude actually defines this operation in a tail-recursive fashion):: [] + ys = ys; (x:xs) + ys = x : xs+ys; To make this work, both operands should be proper lists, otherwise you may get somewhat surprising (but correct) improper list results like the following:: > [1,2,3]+99; 1:2:3:99 > (1:2:3)+33; 1:2:36 This happens because Pure is dynamically typed and places no limits on ad hoc polymorphism. Note that the latter result is due to the fact that '\ :func:`+`\ ' also denotes the addition of numbers, and the improper tail of the first operand is a number in this case, as is the second operand. Otherwise you might have got an unreduced instance of the '\ :func:`+`\ ' operator instead. .. index:: list; equality .. index:: tuple; equality .. function:: infix == /list x y infix ~= /list x y Equality and inequality of lists and tuples. These compare two lists or tuples by recursively comparing their members, so '\ :func:`==`\ ' must be defined on the list or tuple members if you want to use these operations. Also note that these operations are inherently eager, so applying them to two infinite lists may take an infinite amount of time. :: > reverse [a,b,c] == [c,b,a]; 1 > (a,b,c) == (); 0 .. index:: list; size .. index:: tuple; size .. function:: prefix # x List and tuple size. This operation counts the number of elements in a list or tuple:: > #[a,b,c]; 3 > #(a,b,c); 3 Please note that for obvious reasons this operation is inherently eager, so trying to compute the size of an infinite list will take forever. .. index:: list; indexing .. index:: tuple; indexing .. function:: infix ! x i Indexing of lists and tuples is always zero-based (i.e., indices run from ``0`` to ``#x-1``), and an exception will be raised if the index is out of bounds:: > [1,2,3]!2; 3 > [1,2,3]!4; , line 34: unhandled exception 'out_of_bounds' while evaluating '[1,2,3]!4' .. index:: list; slicing .. index:: tuple; slicing .. function:: infix !! x is The slicing operation takes a list or tuple and a list of indices and returns the list or tuple of the corresponding elements, respectively. Indices which are out of the valid range are silently ignored:: > (1..5)!!(3..10); [4,5] > (1,2,3,4,5)!!(3..10); 4,5 The case of contiguous index ranges, as shown above, is optimized so that it always works in linear time, see Slicing_ below for details. But indices can actually be specified in any order, so that you can retrieve any permutation of the members, also with duplicates. E.g.:: > (1..5)!![2,4,4,1]; [3,5,5,2] This is less efficient than the case of contiguous index ranges, because it requires repeated traversals of the list for each index. For larger lists you should hence use vectors or matrices instead, to avoid the quadratic complexity. .. index:: list; arithmetic sequence .. function:: infix .. x y Arithmetic sequences. Note that the Pure syntax differs from Haskell in that there are no brackets around the construct and a step width is indicated by specifying the first two elements as ``x:y`` instead of ``x,y``. :: > 1..5; [1,2,3,4,5] > 1:3..11; [1,3,5,7,9,11] To prevent unwanted artifacts due to rounding errors, the upper bound in a floating point sequence is always rounded to the nearest grid point:: > 0.0:0.1..0.29; [0.0,0.1,0.2,0.3] > 0.0:0.1..0.31; [0.0,0.1,0.2,0.3] Last but not least, you can specify infinite sequences with an infinite upper bound (``inf`` or ``-inf``):: > 1:3..inf; 1:# > -1:-3..-inf; -1:# The lower bounds of an arithmetic sequence must always be finite. .. function:: null x Test for the empty list and tuple. :: > null []; 1 > null (a,b,c); 0 .. function:: reverse x Reverse a list or tuple. :: > reverse (1..5); [5,4,3,2,1] > reverse (a,b,c); (c,b,a) In addition, the prelude provides the following conversion operations. .. function:: list x tuple x Convert between (finite) lists and tuples. :: > tuple (1..5); 1,2,3,4,5 > list (a,b,c); [a,b,c] The ``list`` function can be used to turn a finite lazy list into an eager one:: > list $ take 10 (-1:-3..-inf); [-1,-3,-5,-7,-9,-11,-13,-15,-17,-19] You can also achieve the same effect somewhat more conveniently by slicing a finite part from a stream:: > (-1:-3..-inf)!!(0..9); [-1,-3,-5,-7,-9,-11,-13,-15,-17,-19] Conversely, it is also possible to convert an (eager) list to a lazy one (a stream). .. function:: stream x Convert a list to a stream. :: > stream (1..10); 1:# This might appear a bit useless at first sight, since all elements of the stream are in fact already known. However, this operation then allows you to apply other functions to the list and have them evaluated in a lazy fashion. Slicing ------- Indexing and slicing are actually fairly general operations in Pure which are used not only in the context of lists and tuples, but for any type of container data structure which can be "indexed" in some way. Other examples in the standard library are the :mod:`array` and :mod:`dict` containers. The prelude therefore implements slicing in a generic way, so that it works with any kind of container data structure which defines '\ :func:`\!`\ ' in such a manner that it throws an exception when the index is out of bounds. It also works with any kind of index container that implements the :func:`catmap` operation. The prelude also optimizes the case of contiguous integer ranges so that slices like ``xs!!(i..j)`` are computed in linear time if possible. This works, in particular, with lists, strings and matrices. Moreover, the prelude includes some optimization rules and corresponding helper functions to optimize the most common cases at compile time, so that the index range is never actually constructed. To these ends, the slicing expression ``xs!!(i..j)`` is translated to a call ``subseq xs i j`` of the special :func:`subseq` function: .. function:: subseq x i j If ``x`` is a list, matrix or string, and ``i`` and ``j`` are int values, compute the slice ``xs!!(i..j)`` in the most efficient manner possible. This generally avoids constructing the index list ``i..j``. Otherwise ``i..j`` is computed and :func:`subseq` falls back to the :func:`slice` function below to compute the slice in the usual way. .. function:: slice x ys Compute the slice ``x!!ys`` using the standard slicing operation, without any special compile time tricks. (Runtime optimizations are still applied if possible.) You can readily see the effects of this optimization by running the slicing operator against :func:`slice`:: > let xs = 1..1000000; > stats -m > #slice xs (100000..299990); 199991 0.34s, 999957 cells > #xs!!(100000..299990); 199991 0.14s, 399984 cells Even more drastic improvements in both running time and memory usage can be seen in the case of matrix slices:: > let x = rowvector xs; > #slice x (100000..299990); 199991 0.19s, 599990 cells > #x!!(100000..299990); 199991 0s, 10 cells .. _Hash Pairs: Hash Pairs ---------- .. index:: hash pair, hash rocket The prelude provides another special kind of pairs called "hash pairs", which take the form ``key=>value``. These are used in various contexts to denote key-value associations. The only operations on hash pairs provided by the prelude are equality testing (which recursively compares the components) and the functions :func:`key` and :func:`val`: .. constructor:: infix => x y The hash pair constructor, also known as the "hash rocket". .. function:: infix == /hashpair x y infix ~= /hashpair x y Equality and inequality of hash pairs. :: > ("foo"=>99) == ("bar"=>99); 0 .. function:: key (x=>y) val (x=>y) Extract the components of a hash pair. :: > key ("foo"=>99), val ("foo"=>99); "foo",99 Note that in difference to the tuple operator '\ :cons:`,`\ ', the hash rocket '\ :cons:`=>`\ ' is non-associative, so nested applications *must* be parenthesized, and ``(x=>y)=>z`` is generally *not* the same as ``x=>(y=>z)``. Also note that '\ :cons:`,`\ ' has lower precedence than '\ :cons:`=>`\ ', so to include a tuple as key or value in a hash pair, the tuple must be parenthesized, as in ``"foo"=>(1,2)`` (whereas ``"foo"=>1,2`` denotes a tuple whose first element happens to be a hash pair). .. List Functions -------------- This mostly comes straight from the Q prelude which in turn was based on the first edition of the Bird/Wadler book, and is very similar to what you can find in the Haskell prelude. Some functions have slightly different names, though, and of course everything is typed dynamically. Common List Functions ~~~~~~~~~~~~~~~~~~~~~ .. function:: any p xs test whether the predicate ``p`` holds for any of the members of ``xs`` .. function:: all p xs test whether the predicate ``p`` holds for all of the members of ``xs`` .. function:: cat xs concatenate a list of lists .. function:: catmap f xs convenience function which combines :func:`cat` and :func:`map`; this is also used to implement list comprehensions .. function:: do f xs apply ``f`` to all members of ``xs``, like :func:`map`, but throw away all intermediate results and return ``()`` .. function:: drop n xs remove ``n`` elements from the front of ``xs`` .. function:: dropwhile p xs remove elements from the front of ``xs`` while the predicate ``p`` is satisfied .. function:: filter p xs return the list of all members of ``xs`` satisfying the predicate ``p`` .. function:: foldl f a xs accumulate the binary function ``f`` over all members of ``xs``, starting from the initial value ``a`` and working from the front of the list towards its end .. function:: foldl1 f xs accumulate the binary function ``f`` over all members of ``xs``, starting from the value ``head xs`` and working from the front of the list towards its end; ``xs`` must be nonempty .. function:: foldr f a xs accumulate the binary function ``f`` over all members of ``xs``, starting from the initial value ``a`` and working from the end of the list towards its front .. function:: foldr1 f xs accumulate the binary function ``f`` over all members of ``xs``, starting from the value ``last xs`` and working from the end of the list towards its front; ``xs`` must be nonempty .. function:: head xs return the first element of ``xs``; ``xs`` must be nonempty .. function:: index xs x search for an occurrence of ``x`` in ``xs`` and return the index of the first occurrence, if any, ``-1`` otherwise Note: This uses equality :func:`==` to decide whether a member of ``xs`` is an occurrence of ``x``, so :func:`==` must have an appropriate definition on the list members. .. function:: init xs return all but the last element of ``xs``; ``xs`` must be nonempty .. function:: last xs return the last element of ``xs``; ``xs`` must be nonempty .. function:: listmap f xs convenience function which works like :func:`map`, but also deals with matrix and string arguments while ensuring that the result is always a list; this is primarily used to implement list comprehensions .. function:: map f xs apply ``f`` to each member of ``xs`` .. function:: scanl f a xs accumulate the binary function ``f`` over all members of ``xs``, as with :func:`foldl`, but return all intermediate results as a list .. function:: scanl1 f xs accumulate the binary function ``f`` over all members of ``xs``, as with :func:`foldl1`, but return all intermediate results as a list .. function:: scanr f a xs accumulate the binary function ``f`` over all members of ``xs``, as with :func:`foldr`, but return all intermediate results as a list .. function:: scanr1 f xs accumulate the binary function ``f`` over all members of ``xs``, as with :func:`foldr1`, but return all intermediate results as a list .. function:: sort p xs Sorts the elements of the list ``xs`` in ascending order according to the given predicate ``p``, using the C ``qsort`` function. The predicate ``p`` is invoked with two arguments and should return a truth value indicating whether the first argument is "less than" the second. (An exception is raised if the result of a comparison is not a machine integer.) :: > sort (>) (1..10); [10,9,8,7,6,5,4,3,2,1] > sort (<) ans; [1,2,3,4,5,6,7,8,9,10] .. function:: tail xs return all but the first element of ``xs``; ``xs`` must be nonempty .. function:: take n xs take ``n`` elements from the front of ``xs`` .. function:: takewhile p xs take elements from the front of ``xs`` while the predicate ``p`` is satisfied .. List Generators ~~~~~~~~~~~~~~~ Some useful (infinite) list generators, as well as some finite (and eager) variations of these. The latter work like a combination of :func:`take` or :func:`takewhile` and the former, but are implemented directly for better efficiency. .. function:: cycle xs cycles through the elements of the nonempty list ``xs``, ad infinitum .. function:: cyclen n xs eager version of :func:`cycle`, returns the first ``n`` elements of ``cycle xs`` .. function:: iterate f x returns the stream containing ``x``, ``f x``, ``f (f x)``, etc., ad infinitum .. function:: iteraten n f x eager version of :func:`iterate`, returns the first ``n`` elements of ``iterate f x`` .. function:: iterwhile p f x another eager version of :func:`iterate`, returns the list of all elements from the front of ``iterate f x`` for which the predicate ``p`` holds .. function:: repeat x returns an infinite stream of ``x``\ s .. function:: repeatn n x eager version of :func:`repeat`, returns a list with ``n`` ``x``\ s .. Zip and Friends ~~~~~~~~~~~~~~~ .. function:: unzip xys takes a list of pairs to a pair of lists of corresponding elements .. function:: unzip3 xyzs :func:`unzip` with triples .. function:: zip xs ys return the list of corresponding pairs ``(x,y)`` where ``x`` runs through the elements of ``xs`` and ``y`` runs through the elements of ``ys`` .. function:: zip3 xs ys zs :func:`zip` with three lists, returns a list of triples .. function:: zipwith f xs ys apply the binary function ``f`` to corresponding elements of ``xs`` and ``ys`` .. function:: zipwith3 f xs ys zs apply the ternary function ``f`` to corresponding elements of ``xs``, ``ys`` and ``zs`` Pure also has the following variations of :func:`zipwith` and :func:`zipwith3` which throw away all intermediate results and return the empty tuple ``()``. That is, these work like :func:`do` but pull arguments from two or three lists, respectively: .. function:: dowith f xs ys apply the binary function ``f`` to corresponding elements of ``xs`` and ``ys``, return ``()`` .. function:: dowith3 f xs ys zs apply the ternary function ``f`` to corresponding elements of ``xs``, ``ys`` and ``zs``, return ``()`` .. _String Functions: String Functions ---------------- .. index:: strings Pure strings are null-terminated character strings encoded in UTF-8, see the Pure Manual for details. The prelude provides various operations on strings, including a complete set of list-like operations, so that strings can be used mostly as if they were lists, although they are really implemented as C character arrays for reasons of efficiency. Pure also has some powerful operations to convert between Pure expressions and their string representation, see `Eval and Friends`_ for those. Basic String Functions ~~~~~~~~~~~~~~~~~~~~~~ .. index:: string; concatenation .. index:: string; indexing .. index:: string; slicing .. function:: infix + /string s t infix ! /string s i infix !! /string s is String concatenation, indexing and slicing works just like with lists:: > "abc"+"xyz"; "abcxyz" > let s = "The quick brown fox jumps over the lazy dog."; > s!5; "u" > s!!(20..24); "jumps" .. index:: string; size .. function:: null /string s prefix # /string s Checking for empty strings and determining the size of a string also works as expected:: > null ""; 1 > null s; 0 > #s; 44 .. index:: string; comparisons .. function:: infix == /string s t infix ~= /string s t infix <= /string s t infix >= /string s t infix < /string s t infix > /string s t String equality and comparisons. This employs the usual lexicographic order based on the (UTF-8) character codes. :: > "awe">"awesome"; 0 > "foo">="bar"; 1 > "foo"=="bar"; 0 You can search for the location of a substring in a string, and extract a substring of a given length: .. function:: index /string s u Returns the (zero-based) index of the first occurrence of the substring ``u`` in ``s``, or -1 if ``u`` is not found in ``s``. .. function:: substr s i n Extracts a substring of (at most) ``n`` characters at position ``i`` in ``s``. This takes care of all corner cases, adjusting index and number of characters so that the index range stays confined to the source string. Example:: > index s "jumps"; 20 > substr s 20 10; "jumps over" Note that Pure doesn't have a separate type for individual characters. Instead, these are represented as strings ``c`` containing exactly one (UTF-8) character (i.e., ``#c==1``). It is possible to convert such single character strings to the corresponding integer character codes, and vice versa: .. function:: ord c Ordinal number of a single character string ``c``. This is the character's code point in the Unicode character set. .. function:: chr n Converts an integer back to the character with the corresponding code point. .. index:: character arithmetic In addition, the usual character arithmetic works, including arithmetic sequences of characters, so that you can write stuff like the following:: > "a"-"A"; 32 > "u"-32; "U" > "a".."k"; ["a","b","c","d","e","f","g","h","i","j","k"] For convenience, the prelude provides the following functions to convert between strings and lists (or other aggregates) of characters. .. function:: chars s list /string s Convert a string ``s`` to a list of characters. .. function:: tuple /string s matrix /string s Convert a string ``s`` to a tuple or (symbolic) matrix of characters, respectively. .. function:: strcat xs Concatenate a list ``xs`` of strings (in particular, this converts a list of characters back to a string). .. function:: string xs Convert a list, tuple or (symbolic) matrix of strings to a string. In the case of a list, this is synonymous with :func:`strcat`, but it also works with the other types of aggregates. For instance:: > list "abc"; ["a","b","c"] > string ("a".."z"); "abcdefghijklmnopqrstuvwxyz" The following functions are provided to deal with strings of "tokens" separated by a given delimiter string. .. function:: split delim s Splits ``s`` into a list of substrings delimited by ``delim``. .. function:: join delim xs Joins the list of strings ``xs`` to a single string, interpolating the given ``delim`` string. Example:: > let xs = split " " s; xs; ["The","quick","brown","fox","jumps","over","the","lazy","dog."] > join ":" xs; "The:quick:brown:fox:jumps:over:the:lazy:dog." We mention in passing here that more elaborate string matching, splitting and replacement operations based on regular expressions are provided by the system module, see `Regex Matching`_. If that isn't enough already, most generic list operations carry over to strings in the obvious way, treating the string like a list of characters. (Polymorphic operations such as :func:`map`, which aren't guaranteed to yield string results under all circumstances, will actually return lists in that case, so you might have to apply :func:`string` explicitly to convert these back to a string.) For instance:: > filter (>="k") s; "qukrownoxumpsovrtlzyo" > string $ map pred "ibm"; "hal" List comprehensions can draw values from strings, too:: > string [x+1 | x="HAL"]; "IBM" .. Low-Level Operations ~~~~~~~~~~~~~~~~~~~~ The following routines are provided by the runtime to turn raw C ``char*`` pointers (also called `byte strings` in Pure parlance, to distinguish them from Pure's "cooked" UTF-8 string values) into corresponding Pure strings. Normally you don't have to worry about this, because the C interface already takes care of the necessary marshalling, but in some low-level code these operations are useful. Also note that here and in the following, the :func:`cstring` routines also convert the string between the system encoding and Pure's internal UTF-8 representation. .. function:: string /pointer s cstring s Convert a pointer ``s`` to a Pure string. ``s`` must point to a null-terminated C string. These routines take ownership of the original string value, assuming it to be malloced, so you should only use these for C strings which are specifically intended to be freed by the user. .. function:: string_dup s cstring_dup s Convert a pointer ``s`` to a Pure string. Like above, but these functions take a copy of the string, leaving the original C string untouched. .. The reverse transformations are also provided. These take a Pure string to a byte string (raw ``char*``). .. function:: byte_string s byte_cstring s Construct a byte string from a Pure string ``s``. The result is a raw pointer object pointing to the converted string. The original Pure string is always copied (and, in the case of :func:`byte_cstring`, converted to the system encoding). The resulting byte string is a malloced pointer which can be used like a C ``char*``, and has to be freed explicitly by the caller when no longer needed. .. It is also possible to convert Pure string lists or symbolic vectors of strings to byte string vectors and vice versa. These are useful if you need to pass an ``argv``-like string vector (i.e., a ``char**`` or ``char*[]``) to C routines. The computed C vectors are malloced pointers which have an extra :const:`NULL` pointer as the last entry, and should thus be usable for almost any purpose which requires such a string vector in C. They also take care of garbage-collecting themselves. The original string data is always copied. As usual, the :func:`cstring` variants do automatic conversions to the system encoding. .. function:: byte_string_pointer xs byte_cstring_pointer xs Convert a list or vector of Pure strings to a C ``char**``. .. function:: string_list n p cstring_list n p Convert a C ``char**`` to a list of Pure strings. .. function:: string_vector n p cstring_vector n p Convert a C ``char**`` to a symbolic vector of Pure strings. Note that the back conversions take an additional first argument which denotes the number of strings to retrieve. If you know that the vector is :const:`NULL`-terminated then this can also be an infinite value (``inf``) in which case the number of elements will be figured out automatically. Processing always stops at the first :const:`NULL` pointer encountered. Also note that, as of version 0.45, Pure has built-in support for passing ``argv``-style vectors as arguments by means of the ``char**`` and ``void**`` pointer types. However, the operations provided here are more general in that they allow you to both encode and decode such values in an explicit fashion. This is useful, e.g., for operations like ``getopt`` which may mutate the given ``char**`` vector. If you have ``getopt`` in your C library, you can try the following example. First enter these definitions:: extern int getopt(int argc, char **argv, char *optstring); optind = get_int $ addr "optind"; optarg = cstring_dup $ get_pointer $ addr "optarg"; Now let's run ``getopt`` on a byte string vector constructed from an argument vector (which includes the "program name" in the first element):: > let args = byte_cstring_pointer {"progname","boo","-n","-tfoo","bar"}; > getopt 5 args "nt:", optarg; 110,# > getopt 5 args "nt:", optarg; 116,"foo" > getopt 5 args "nt:", optarg; -1,# Note that 110 and 116 are the character codes of the option characters ``n`` and ``t``, where the latter option takes an argument, as returned by ``optarg``. Finally, ``getopt`` returns -1 to indicate that there are no more options, and we can retrieve the current ``optindex`` value and the mutated argument vector to see which non-option arguments remain to be processed, as follows:: > optind, cstring_vector 5 args; 3,{"progname","-n","-tfoo","boo","bar"} It is now an easy exercise to design your own high-level wrapper around ``getopt`` to process command line arguments in Pure. However, this isn't really necessary since the Pure library already offers such an operation which doesn't rely on any special system functions, see `Option Parsing`_ in the `System Interface`_ section. .. _Matrix Functions: Matrix Functions ---------------- Matrices are provided as an alternative to the list and tuple aggregates which provide contant time access to their members and are tailored for use in numeric computations. .. index:: matrix; size .. index:: matrix; dimensions .. function:: prefix # /matrix x dim x Determine the size of a matrix (number of elements) and its dimensions (number of rows and columns). :: > let x = {1,2,3;4,5,6}; #x; 6 > dim x; 2,3 .. function:: null /matrix Check for empty matrices. Note that there are various kinds of these, as a matrix may have zero rows or columns, or both. .. function:: infix == /matrix x y infix ~= /matrix x y Matrix equality and inequality. These check the dimensions and the matrix elements for equality:: > x == transpose x; 0 .. function:: infix ! /matrix x i infix !! /matrix x is Indexing and slicing. Indexing and slicing employ the standard Pure operators '\ :func:`\!`\ ' and '\ :func:`\!\!`\ '. They work pretty much like in MATLAB and Octave, but note that Pure matrices are in row-major order and the indices are zero-based. It is possible to access elements with a one-dimensional index (in row-major oder):: > x!3; 4 Or you can specify a pair of row and column index:: > x!(1,0); 4 Slicing works accordingly. You can either specify a list of (one- or two-dimensional) indices, in which case the result is always a row vector:: > x!!(2..5); {3,4,5,6} Or you can specify a pair of row and column index lists:: > x!!(0..1,1..2); {2,3;5,6} The following abbreviations are provided to grab a slice from a row or column:: > x!!(1,1..2); {5,6} > x!!(0..1,1); {2;5} As in the case of lists, matrix slices are optimized to handle cases with contiguous index ranges in an efficient manner, see Slicing_ for details. To these ends, the helper functions :func:`subseq/matrix` and :func:`subseq2/matrix` are defined to handle the necessary compile time optimizations. Most of the generic list operations are implemented on matrices as well, see `Common List Functions`_. Hence operations like :func:`map` and :func:`zipwith` work as expected:: > map succ {1,2,3;4,5,6}; {2,3,4;5,6,7} > zipwith (+) {1,2,3;4,5,6} {1,0,1;0,2,0}; {2,2,4;4,7,6} The matrix module also provides a bunch of other specialized matrix operations, including all the necessary operations for matrix comprehensions. We briefly summarize the most important operations below; please refer to matrices.pure for all the gory details. Also make sure you check :ref:`Matrices and Vectors` in the Pure Manual for some more examples, and the `Record Functions`_ section for an implementation of records using symbolic vectors. Matrix Construction and Conversions ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. function:: matrix xs This function converts a list or tuple to a corresponding matrix. :func:`matrix` also turns a list of lists or matrices specifying the rows of the matrix to the corresponding rectangular matrix; otherwise, the result is a row vector. (In the former case, :func:`matrix` may throw a :cons:`bad_matrix_value` exception in case of dimension mismatch, with the offending submatrix as argument.) :: > matrix [1,2,3]; {1,2,3} > matrix [[1,2,3],[4,5,6]]; {1,2,3;4,5,6} .. function:: rowvector xs colvector xs vector xs The :func:`rowvector` and :func:`colvector` functions work in a similar fashion, but expect a list, tuple or matrix of elements and always return a row or column vector, respectively (i.e., a :math:`1\times n` or :math:`n\times 1` matrix, where :math:`n` is the size of the converted aggregate). Also, the :func:`vector` function is a synonym for :func:`rowvector`. These functions can also be used to create recursive (symbolic) matrix structures of arbitrary depth, which provide a nested array data structure with efficient (constant time) element access. :: > rowvector [1,2,3]; {1,2,3} > colvector [1,2,3]; {1;2;3} > vector [rowvector [1,2,3],colvector [4,5,6]]; {{1,2,3},{4;5;6}} Note that for convenience, there's also an alternative syntax for entering nested vectors more easily, see the description of the :ref:`non-splicing vector brackets` below for details. .. function:: rowvectorseq x y step colvectorseq x y step vectorseq x y step With these functions you can create a row or column vector from an arithmetic sequence. Again, :func:`vectorseq` is provided as a synonym for :func:`rowvectorseq`. These operations are optimized for the case of int and double ranges. :: > rowvectorseq 0 10 1; {0,1,2,3,4,5,6,7,8,9,10} > colvectorseq 0 10 1; {0;1;2;3;4;5;6;7;8;9;10} > vectorseq 0.0 0.9 0.1; {0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9} The prelude also contains some optimization rules which translate calls to :func:`vector` et al on arithmetic sequences to the corresponding calls to :func:`vectorseq` et al, such as:: def vector (n1:n2..m) = vectorseq n1 m (n2-n1); def vector (n..m) = vectorseq n m 1; Example:: > foo = vector (1..10); > bar = vector (0.0:0.1..0.9); > show foo bar bar = vectorseq 0.0 0.9 0.1; foo = vectorseq 1 10 1; > foo; bar; {1,2,3,4,5,6,7,8,9,10} {0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9} Please note that these optimization rules assume that basic arithmetic works with the involved elements, which may give you trouble if you try to use :func:`vector` et al with exotic kinds of user-defined arithmetic sequences. To disable them, simply run the interpreter with the option ``--disable vectorseq-opt``. .. function:: dmatrix xs cmatrix xs imatrix xs smatrix xs These functions convert a list or matrix to a matrix of the corresponding type (integer, double, complex or symbolic). If the input is a list, the result is always a row vector; this is usually faster than the :func:`matrix` and :func:`vector` operations, but requires that the elements already are of the appropriate type. :: > imatrix [1,2,3]; {1,2,3} > dmatrix {1,2,3;4,5,6}; {1.0,2.0,3.0;4.0,5.0,6.0} In addition, these functions can also be invoked with either an int ``n`` or a pair ``(n,m)`` of ints as argument, in which case they construct a zero rowvector or matrix with the corresponding dimensions. :: > imatrix 3; {0,0,0} > imatrix (2,3); {0,0,0;0,0,0} .. function:: list /matrix x list2 /matrix x tuple /matrix x These convert a matrix back to a flat list or tuple. The :func:`list2` function converts a matrix to a list of lists (one sublist for each row of the matrix). :: > tuple {1,2,3;4,5,6}; 1,2,3,4,5,6 > list {1,2,3;4,5,6}; [1,2,3,4,5,6] > list2 {1,2,3;4,5,6}; [[1,2,3],[4,5,6]] > list2 {1,2,3}; [[1,2,3]] .. _non-splicing: In addition, the following special syntax is provided as a shorthand notation for nested vector structures: .. macro:: outfix {| |} x, y, z, ... Non-splicing vector brackets. These work like ``{x,y,z,...}``, but unlike these they will *not* splice submatrices in the arguments ``x,y,z,...`` So they work a bit like quoted vectors ``'{x,y,z,...}``, but the arguments ``x,y,z,...`` will be evaluated as usual. The non-splicing vector brackets provide a convenient shorthand to enter symbolic vector values which may contain other vectors or matrices as components. For instance, note how the ordinary matrix brackets combine the column subvectors in the first example below to a 3x2 matrix, while the non-splicing brackets in the second example create a 1x2 row vector with the column vectors as members instead:: > {{1;2;3},{4;5;6}}; {1,4;2,5;3,6} > {|{1;2;3},{4;5;6}|}; {{1;2;3},{4;5;6}} The second example works like a quoted matrix expression such as ``'{{1;2;3},{4;5;6}}``, but the non-splicing brackets also evaluate their arguments:: > '{vector (1..3),vector (4..6)}; {vector (1..3),vector (4..6)} > {|vector (1..3),vector (4..6)|}; {{1,2,3},{4,5,6}} The ``{| |}`` brackets can be nested. Examples:: > {|1,{|vector (1..5),2*3|},{}|}; {1,{{1,2,3,4,5},6},{}} > {|{|{1,2}|},{|{3,4}|}|}; {{{1,2}},{{3,4}}} Also note that the ``{| |}`` brackets only produce row vectors, but you can just transpose the result if you need a column vector instead:: > transpose {|{1;2;3},{4;5;6}|}; {{1;2;3};{4;5;6}} Finally, note that the notation ``{| |}`` without any arguments is not supported, simply write ``{}`` for the empty vector instead. Matrix Inspection and Manipulation ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. type:: dmatrix cmatrix imatrix smatrix nmatrix Convenience types for the different subtypes of matrices (double, complex, int, symbolic and numeric, i.e., non-symbolic). These can be used as type tags on the left-hand side of equations to match specific types of matrices. .. function:: dmatrixp x cmatrixp x imatrixp x smatrixp x nmatrixp x Corresponding predicates to check for different kinds of matrices. .. function:: vectorp x rowvectorp x colvectorp x Check for different kinds of vectors (these are just matrices with one row or column). .. function:: stride x The stride of a matrix denotes the real row size of the underlying C array, see the description of the :func:`pack` function below for further details. There's little use for this value in Pure, but it may be needed when interfacing to C. .. function:: subseq /matrix x i j subseq2 /matrix x i j k l Helper functions to optimize matrix slices, see Slicing_ for details. :func:`subseq2/matrix` is a special version of :func:`subseq/matrix` which is used to optimize the case of 2-dimensional matrix slices ``xs!!(i..j,k..l)``. .. function:: row x i col x i Extract the ``i``\ th row or column of a matrix. .. function:: rows x cols x Return the list of all rows or columns of a matrix. .. function:: diag x subdiag x k supdiag x k Extract (sub-,super-) diagonals from a matrix. Sub- and super-diagonals for ``k=0`` return the main diagonal. Indices for sub- and super-diagonals can also be negative, in which case the corresponding super- or sub-diagonal is returned instead. In each case the result is a row vector. .. function:: submat x (i,j) (n,m) Extract a submatrix of a given size at a given offset. The result shares the underlying storage with the input matrix (i.e., matrix elements are *not* copied) and so this is a comparatively cheap operation. .. function:: rowcat xs colcat xs Construct matrices from lists of rows and columns. These take either scalars or submatrices as inputs; corresponding dimensions must match. :func:`rowcat` combines submatrices vertically, like ``{x;y}``; :func:`colcat` combines them horizontally, like ``{x,y}``. Note: Like the built-in matrix constructs, these operations may throw a :func:`bad_matrix_value` exception in case of dimension mismatch. .. function:: matcat xs Construct a matrix from a (symbolic) matrix of other matrices and/or scalars. This works like a combination of :func:`rowcat` and :func:`colcat`, but draws its input from a matrix instead of a list of matrices, and preserves the overall layout of the "host" matrix. The net effect is that the host matrix is flattened out. If all elements of the input matrix are scalars already, the input matrix is returned unchanged. .. function:: rowcatmap f xs colcatmap f xs rowmap f xs colmap f xs Various combinations of :func:`rowcat`, :func:`colcat` and :func:`map`. These are used, in particular, for implementing matrix comprehensions. .. function:: diagmat x subdiagmat x k supdiagmat x k Create a (sub-,super-) diagonal matrix from a row vector ``x`` of size ``n``. The result is always a square matrix with dimension ``(n+k,n+k)``, which is of the same matrix type (double, complex, int, symbolic) as the input and has the elements of the vector on its ``k``\ th sub- or super-diagonal, with all other elements zero. A negative value for ``k`` turns a sub- into a super-diagonal matrix and vice versa. .. function:: re /matrix x im /matrix x conj /matrix x Extract the real and imaginary parts and compute the conjugate of a numeric matrix. .. function:: pack x packed x Pack a matrix. This creates a copy of the matrix which has the data in contiguous storage. It also frees up extra memory if the matrix was created as a slice from a bigger matrix (see :func:`submat` above) which has since gone the way of the dodo. The :func:`packed` predicate can be used to verify whether a matrix is already packed. Note that even if a matrix is already packed, :func:`pack` will make a copy of it anyway, so :func:`pack` also provides a quick way to copy a matrix, e.g., if you want to pass it as an input/output parameter to a GSL routine. .. function:: redim (n,m) x redim n x Change the dimensions of a matrix without changing its size. The total number of elements must match that of the input matrix. Reuses the underlying storage of the input matrix if possible (i.e., if the matrix is :func:`packed`). You can also redim a matrix to a given row size ``n``. In this case the row size must divide the total size of the matrix. .. function:: sort /matrix p x Sorts the elements of a matrix (non-destructively, i.e., without changing the original matrix) according to the given predicate, using the C ``qsort`` function. This works exactly the same as with lists (see `Common List Functions`_), except that it takes and returns a matrix instead of a list. Note that the function sorts *all* elements of the matrix in one go (regardless of the dimensions), as if the matrix was a single big vector. The result matrix has the same dimensions as the input matrix. Example:: > sort (<) {10,9;8,7;6,5}; {5,6;7,8;9,10} If you'd like to sort the individual rows instead, you can do that as follows:: > sort_rows p = rowcat . map (sort p) . rows; > sort_rows (<) {10,9;8,7;6,5}; {9,10;7,8;5,6} Likewise, to sort the columns of a matrix:: > sort_cols p = colcat . map (sort p) . cols; > sort_cols (<) {10,9;8,7;6,5}; {6,5;8,7;10,9} Also note that the pure-gsl module provides an interface to the GSL routines for sorting numeric (int and double) vectors using the standard order. These will usually be much faster than :func:`sort/matrix`, whereas :func:`sort/matrix` is more flexible in that it also allows you to sort symbolic matrices and to choose the order predicate. .. function:: transpose /matrix x Transpose a matrix. Example:: > transpose {1,2,3;4,5,6}; {1,4;2,5;3,6} .. function:: rowrev x colrev x reverse /matrix x Reverse a matrix. :func:`rowrev` reverses the rows, :func:`colrev` the columns, :func:`reverse` both dimensions. .. Pointers and Matrices ~~~~~~~~~~~~~~~~~~~~~ Last but not least, the matrix module also offers a bunch of low-level operations for converting between matrices and raw pointers. These are typically used to shovel around massive amounts of numeric data between Pure and external C routines, when performance and throughput is an important consideration (e.g., graphics, video and audio applications). The usual caveats concerning direct pointer manipulations apply. .. function:: pointer /matrix x Get a pointer to the underlying C array of a matrix. The data is *not* copied. Hence you have to be careful when passing such a pointer to C functions if the underlying data is non-contiguous; when in doubt, first use the :func:`pack` function to place the data in contiguous storage, or use one of the matrix-pointer conversion routines below. .. function:: double_pointer p x float_pointer p x complex_pointer p x complex_float_pointer p x int64_pointer p x int_pointer p x short_pointer p x byte_pointer p x These operations copy the contents of a matrix to a given pointer and return that pointer, converting to the target data type on the fly if necessary. The given pointer may also be :const:`NULL`, in which case suitable memory is malloced and returned; otherwise the caller must ensure that the memory pointed to by ``p`` is big enough for the contents of the given matrix. The source matrix ``x`` may be an arbitrary numeric matrix. In the case of :func:`int64_pointer`, ``x`` may also be a symbolic matrix holding bigint values which are converted to 64 bit machine integers. .. function:: double_matrix (n,m) p float_matrix (n,m) p complex_matrix (n,m) p complex_float_matrix (n,m) p int64_matrix (n,m) p int_matrix (n,m) p short_matrix (n,m) p byte_matrix (n,m) p These functions allow you to create a matrix from a pointer, copying the data and converting it from the source type on the fly if necessary. The result will be a numeric matrix of the appropriate type, except in the case of :func:`int64_matrix` where the result is a symbolic matrix consisting of bigint values. The source pointer ``p`` may also be :const:`NULL`, in which case the new matrix is filled with zeros instead. Otherwise the caller must ensure that the pointer points to properly initialized memory big enough for the requested dimensions. The given dimension may also be just an integer ``n`` if a row vector is to be created. .. function:: double_matrix_view (n,m) p complex_matrix_view (n,m) p int_matrix_view (n,m) p These operations can be used to create a numeric matrix view of existing data, without copying the data. The data must be double, complex or int, the pointer must not be :const:`NULL` and the caller must also ensure that the memory persists for the entire lifetime of the matrix object. The given dimension may also be just an integer ``n`` if a row vector view is to be created. .. _Record Functions: Record Functions ---------------- As of Pure 0.41, the prelude also provides a basic record data structure, implemented as symbolic vectors of ``key=>value`` pairs which support a few dictionary-like operations such as :func:`member/record`, :func:`insert/record` and indexing. Records may be represented as row, column or empty vectors (i.e., the number of rows or columns must be zero or one). They must be symbolic matrices consisting only of "hash pairs" ``key=>value``, where the keys can be either symbols or strings. The values can be any kind of Pure data; in particular, they may themselves be records, so records can be nested. The following operations are provided. Please note that all updates of record members are non-destructive and thus involve copying, which takes linear time (and space) and thus might be slow for large record values; if this is a problem then you should use dictionaries instead (cf. Dictionaries_). Or you can create mutable records by using expression references (cf. `Expression References`_) as values, which allow you to modify the data in-place. Element lookup (indexing) uses binary search on an internal index data structure and thus takes logarithmic time once the index has been constructed (which is done automatically when needed, or when calling ``recordp`` on a fresh record value). Also note that records with duplicate keys are permitted; in such a case the following operations will always operate on the *last* entry for a given key. .. type:: record /type The record type. This is functionally equivalent to :func:`recordp`, but can be used as a type tag on the left-hand side of equations. .. function:: recordp x Check for record values. .. function:: record x Normalizes a record. This removes duplicate keys and orders the record by keys (using an apparently random but well-defined order of the key values), so that normalized records are syntactically equal (:func:`===`) if and only if they contain the same hash pairs. For convenience, this function can also be used directly on lists and tuples of hash pairs to convert them to a normalized record value. .. function:: prefix # /record x The size of a record (number of entries it contains). Duplicate entries are counted. (This is in fact just the standard matrix size operation.) .. function:: member /record x y Check whether ``x`` contains the key ``y``. .. function:: infix ! /record x y Retrieves the (last) value associated with the key ``y`` in ``x``, if any, otherwise throws an :cons:`out_of_bounds` exception. .. function:: infix !! /record x ys Slicing also works as expected, by virtue of the generic definition of slicing provided by the matrix data structure. .. function:: insert /record x (y=>z) update /record x y z Associate the key ``y`` with the value ``z`` in ``x``. If ``x`` already contains the key ``y`` then the corresponding value is updated (the last such value if ``x`` contains more than one association for ``y``), otherwise a new member is inserted at the end of the record. .. function:: delete /record x y Delete the key ``y`` (and its associated value) from ``x``. If ``x`` contains more than one entry for ``y`` then the last such entry is removed. .. function:: keys /record x vals /record x List the keys and associated values of ``x``. If the record contains duplicate keys, they are all listed in the order in which they are stored in the record. Here are a few basic examples:: > let r = {x=>5, y=>12}; > r!y; r!![y,x]; // indexing and slicing 12 {12,5} > keys r; vals r; // keys and values of a record {x,y} {5,12} > insert r (x=>99); // update an existing entry {x=>99,y=>12} > insert ans (z=>77); // add a new entry {x=>99,y=>12,z=>77} > delete ans z; // delete an existing entry {x=>99,y=>12} > let r = {r,x=>7,z=>3}; r; // duplicate key x {x=>5,y=>12,x=>7,z=>3} > r!x, r!z; // indexing returns the last value of x 7,3 > delete r x; // delete removes the last entry for x {x=>5,y=>12,z=>3} > record r; // normalize (remove dups and sort) {x=>7,y=>12,z=>3} > record [x=>5, x=>7, y=>12]; // construct a normalized record from a list {x=>7,y=>12} > record (x=>5, x=>7, y=>12); // ... or a tuple {x=>7,y=>12} More examples can be found in the :ref:`Record Data` section in the Pure Manual. .. Primitives ---------- This prelude module is a collection of various lowlevel operations, which are implemented either directly by machine instructions or by C functions provided in the runtime. In particular, this module defines the basic arithmetic and logic operations on machine integers, bigints and floating point numbers, as well as various type checking predicates and conversions between different types. Some basic pointer operations are also provided, as well as "sentries" (Pure's flavour of object finalizers) and "references" (mutable expression pointers). Special Constants ~~~~~~~~~~~~~~~~~ .. constant:: inf nan IEEE floating point infinities and NaNs. You can test for these using the :func:`infp` and :func:`nanp` predicates, see Predicates_ below. .. constant:: NULL = pointer 0 Generic null pointer. (This is actually a built-in constant.) You can also check for null pointers with the :func:`null/pointer` predicate, see Predicates_. Arithmetic ~~~~~~~~~~ The basic arithmetic and logic operations provided by this module are summarized in the following table: =========== =============== ========================================= Kind Operator Meaning =========== =============== ========================================= Arithmetic ``+`` ``-`` addition, subtraction (also unary minus) \ ``*`` ``/`` multiplication, division (inexact) \ ``div`` ``mod`` exact int/bigint division/modulus \ ``^`` exponentiation (inexact) Comparisons ``==`` ``~=`` equality, inequality \ ``<`` ``>`` less than, greater than \ ``<=`` ``>=`` less than or equal, greater than or equal Logic ``~`` logical not \ ``&&`` ``||`` and, or (short-circuit) Bitwise ``not`` bitwise not \ ``and`` ``or`` and, or \ ``<<`` ``>>`` bit shifts =========== =============== ========================================= Precedence and and associativity of the operators can be found in the :ref:`operators ` table at the beginning of this section. The names of some operations are at odds with C. Note, in particular, that logical negation is denoted ``~`` instead of ``!`` (and, consequently, ``~=`` denotes inequality, rather than ``!=``), and the bitwise operations are named differently. This is necessary because Pure uses ``!``, ``&`` and ``|`` for other purposes. Also, ``/`` always denotes inexact (double) division in Pure, whereas the integer division operators are called ``div`` and ``mod``. (``%``, which is not defined by this module, also has a different meaning in Pure; it's the exact division operator, see `Rational Numbers`_.) The above operations are implemented for int, bigint and, where appropriate, double operands. (Pointer arithmetic and comparisons are provided in a separate module, see `Pointer Arithmetic`_.) The math module (see `Mathematical Functions`_) also provides implementations of the arithmetic and comparison operators for rational, complex and complex rational numbers. Note that the logical operations are actually implemented as special forms in order to provide for short-circuit evaluation. This needs special support from the compiler to work. The primitives module still provides definitions for these, as well as other special forms like ``quote`` and the thunking operator ``&`` so that they may be used as function values and in partial applications, but when used in this manner they lose all their special call-by-name properties; see :ref:`Special Forms` in the Pure Manual for details. The rules for the logical connectives are actually slightly more general than the built-in rules so that an expression of the form ``x&&y`` or ``x||y`` will always be simplified in a sensible way if at least one of the operands is a machine int; e.g., both ``x&&1`` and ``1&&x`` will reduce to just ``x`` if ``x`` is not a machine int. A detailed listing of the basic arithmetic and logical operations follows below. .. function:: infix + x y infix - x y infix * x y infix / x y infix ^ x y Addition, subtraction, multiplication, division and exponentiation. The latter two are inexact and will yield double results. .. function:: prefix - /unary x Unary minus. This has the same precedence as binary '\ :func:`-`\ ' above. .. function:: infix div x y infix mod x y Exact int and bigint division and modulus. .. function:: infix == x y infix ~= x y Equality and inequality. .. function:: infix <= x y infix >= x y infix > x y infix < x y Comparisons. .. function:: prefix ~ x infix && x y infix || x y Logical negation, conjunction and disjunction. These work with machine ints only and are evaluated in short-circuit mode, unless they are invoked as higher-order functions or with operands which aren't machine ints. See the explanations above. .. function:: prefix not x infix and x y infix or x y Bitwise negation, conjunction and disjunction. These work with both machine ints and bigints. .. function:: infix << x k infix >> x k Arithmetic bit shifts. The left operand ``x`` may be a machine int or a bigint. The right operand ``k`` must be a machine int and denotes the (nonnegative) number of bits to shift. .. note:: This operation may expand to a single machine instruction in the right circumstances, thus the condition that ``k`` be nonnegative isn't always checked. This may lead to surprising results if you do specify a negative value for ``k``. However, in the current implementation bigint shifts do check the sign of ``k`` and handle it in the appropriate way, by turning a left shift into a corresponding right shift and vice versa. In addition, the following arithmetic and numeric functions are provided: .. function:: abs x sgn x Absolute value and sign of a number. .. function:: min x y max x y Minimum and maximum of two values. This works with any kind of values which have the ordering relations defined on them. .. function:: succ x pred x Successor (``+1``) and predecessor (``-1``) functions. .. function:: gcd x y lcm x y The greatest common divisor and least common multiple functions from the GMP library. These return a bigint if at least one of the arguments is a bigint, a machine int otherwise. .. function:: pow x y Computes exact powers of ints and bigints. The result is always a bigint. Note that ``y`` must always be nonnegative here, but see the math module (`Mathematical Functions`_) which deals with the case ``y<0`` using rational numbers. Conversions ~~~~~~~~~~~ These operations convert between various types of Pure values. .. function:: hash x Compute a 32 bit hash code of a Pure expression. .. function:: bool x Convert a machine integer to a normalized truth value (``0`` or ``1``). .. function:: int x bigint x double x Conversions between the different numeric types. .. function:: pointer x Convert a string, int or bigint to a pointer value. Converting a string returns a pointer to the underlying UTF8-encoded C string so that it can be passed to the appropriate C functions. Converting an integer gives a pointer with the given numeric address. This may be used to construct special pointer values such as the null pointer (``pointer 0``). .. function:: ubyte x ushort x uint x uint64 x ulong x Convert signed (8/16/32/64) bit integers to the corresponding unsigned quantities. These functions behave as if the value was "cast" to the corresponding unsigned C type, and are most useful for dealing with unsigned integers returned by external C routines. The routines always use the smallest Pure int type capable of holding the result: ``int`` for :func:`ubyte` and :func:`ushort`, ``bigint`` for :func:`uint`, :func:`uint64` and :func:`ulong`. All routines take int parameters. In the case of :func:`uint64`, a bigint parameter is also permitted (which is what the C interface returns for 64 bit values). Also note that :func:`ulong` reduces to either :func:`uint` or :func:`uint64`, depending on the size of ``long`` for the host architecture. The following _`rounding functions` work with all kinds of numbers: .. function:: floor x ceil x Floor and ceil. .. function:: round x trunc x Round or truncate to an integer. .. function:: frac x Fractional part (``x-trunc x``). Note that all these functions return double values for double arguments, so if you need an integer result then you'll have to apply a suitable conversion, as in ``int (floor x)``. Predicates ~~~~~~~~~~ A syntactic equality test is provided, as well as various type checking predicates. Note that type definitions are provided for most of the type checking predicates which don't denote built-in types; see `Prelude Types`_ for details. .. function:: same x y infix === x y infix ~== x y Syntactic equality. In contrast to :func:`==` and :func:`~=`, this is defined on all Pure expressions. Basically, two expressions are syntactically equal if they print out the same in the interpreter. In the special case of pointer objects and closures, which do not always have a syntactic representation in Pure, ``x`` and ``y`` must be the same object (same pointer value or function). .. function:: typep ty x Generic type checking predicate. This checks whether ``x`` is of type ``ty``, where ``ty`` is a symbol denoting any of the built-in types (:type:`int/type`, :type:`bigint/type` etc.) or any type defined in a :keyword:`type` definition. (Note that you may have to quote ``ty`` if it happens to be defined as a variable or parameterless function.) .. function:: intp x bigintp x doublep x stringp x pointerp x matrixp x Predicates to check for the built-in types. .. function:: boolp x Predicate to check for normalized truth values (``0`` and ``1``). .. function:: charp x Predicate to check for single character strings. .. function:: numberp x complexp x realp x rationalp x integerp x Additional number predicates. Note some further "semantic" number predicates are defined in the :mod:`math` module, see `Semantic Number Predicates and Types`_. .. function:: exactp x inexactp x Check whether a number is exact (i.e., doesn't contain any double components). .. function:: infp x nanp x Check for :const:`inf` and :const:`nan` values. .. function:: null /pointer p Check for null pointers. .. function:: applp x listp x rlistp x tuplep x Predicates to check for function applications, lists, proper lists and tuples. Note that :func:`listp` only checks for a toplevel list constructor, whereas :func:`rlistp` also recursively checks the tails of the list; the latter may need time proportional to the list size. The :func:`applp` and :func:`tuplep` predicates look for an application or tuple constructor at the toplevel only, which can always be done in constant time. .. function:: funp x lambdap x thunkp x closurep x Predicates to check for various kinds of function objects (named, anonymous or thunk). :func:`closurep` checks for any kind of "normal" closure (i.e., named functions and lambdas, but not thunks). .. function:: functionp x Convenience function to check for "callable" functions. This includes any kind of closure with a nonzero argument count as well as partial (unsaturated) applications of these. .. function:: symbolp x varp x Predicates to check for any kind of symbol (this also includes operator and nonfix symbols) and for free variable symbols, respectively. Note that varp returns true for any symbol which is not an operator or nonfix symbol (i.e., for any symbol that could in principle be bound to a value, either globally or locally). This holds even if the symbol is currently bound to a function, macro or constant. Inspection ~~~~~~~~~~ The following operations let you peek at various internal information that the interpreter provides to Pure programs either for convenience or for metaprogramming purposes. They are complemented by the evaluation primitives discussed below, see `Eval and Friends`_. .. function:: ans Retrieve the most recently printed result of a toplevel expression evaluated in the read-eval-print loop. This is just a convenience for interactive usage. Note that the :func:`ans` value will stick around until a new expression is computed. (It is possible to clear the :func:`ans` value with the interactive command ``clear ans``, however.) Example:: > 1/3; 0.333333333333333 > ans/2; 0.166666666666667 .. function:: __func__ Returns the (lexically) innermost function at the point of the call. This can be either a global function, a local (named) function introduced in a :keyword:`with` clause or an anonymous function (a lambda). Fails (returning just the literal symbol :func:`__func__` by default) if there is no such function (i.e., if the call is at the toplevel). Note that in contrast to the C99 variable of the same name, this really returns the function value itself in Pure; the :func:`str` function can be used if you need the print name of the function. Examples:: > foo x = if x>0 then x else throw __func__; > foo (-99); , line 2: unhandled exception 'foo' while evaluating 'foo (-99)' > (\x->x+": "+str __func__) "test"; "test: #" If you want, you can add a default rule for :func:`__func__` which specifies the behaviour when :func:`__func__` gets called at the global level. E.g.:: > __func__ = throw "__func__ called at global level"; > __func__; , line 5: unhandled exception '"__func__ called at global level"' while evaluating '__func__' .. macro:: __namespace__ Returns the current namespace at the point of the call. This is implemented as a built-in macro which expands to a string. The empty string is returned in the default namespace. Example:: > namespace foo; > foo = __namespace__; > namespace; > show foo::foo foo::foo = "foo"; > foo::foo; "foo" .. macro:: __dir__ __file__ Returns the directory and absolute filename of the current script, using the canonicalized pathname of the script, as explained in :ref:`Modules and Imports`. The directory name is always terminated with a trailing slash. These macros are useful, e.g., for debugging purposes or if a script needs to locate other files relative to the script file. Like :macro:`__namespace__`, these are built-in macros which expand to string values. The script name is resolved at compile time, so these macros are most useful if a script is run through the interpreter. Also note that both macros return the empty string if the code containing the call is not in a script (i.e., if it is executed directly at the interactive command line or through :func:`eval`). For instance, assume that the following code is stored in the file /home/user/test.pure:: foo = __file__,__dir__; bar = eval "__file__,__dir__"; Then running this script interactively you'll get the following:: > foo; "/home/user/test.pure","/home/user/" > bar; "","" .. macro:: __list__ This expands a (literal) tuple to a list, preserving embedded tuples in the same way that list values are parsed in the Pure language, cf. :ref:`Primary Expressions`. This is provided for the benefit of custom aggregate notations (usually implemented as outfix operators) which are supposed to be parsed like the built-in list and matrix brackets. Example:: > outfix (: :); > def (:x:) = __list__ x; > (:(1,2),(3,4):); [(1,2),(3,4)] Note that this macro uses internal information from the parser not available to Pure programs. Thus there's no way to actually define this macro in Pure, which is why it is provided as a builtin instead. Another rather obscure point that deserves mentioning here is that the special processing of parenthesized expressions happens also if the macro is applied in prefix form. This should rarely be a problem in practice, but if it is then you can use :func:`$` to pass arguments without adding an (undesired) extra level of parentheses:: > ((::)) ((1,2),(3,4)); [(1,2,3,4)] > ((::)) $ (1,2),(3,4); [(1,2),(3,4)] Note that the first expression is really equivalent to ``(:((1,2),(3,4)):)``, *not* ``(:(1,2),(3,4):)`` which can be specified in prefix form using :func:`$` as shown in the second expression. (Remember that :func:`$` is also implemented as a macro and so is substituted away at macro expansion time in the example above.) The same trick works if for some reason you want to apply :macro:`__list__` in a direct fashion:: > __list__ ((1,2),(3,4)); [(1,2,3,4)] > __list__ $ (1,2),(3,4); [(1,2),(3,4)] .. macro:: __locals__ Built-in macro which expands to a list with the local function bindings (:keyword:`with` clauses) visible at this point in the program. The return value is a list of hash pairs ``x=>f`` where ``x`` is the global symbol denoting the function (the symbol is always quoted) and ``f`` is the function value itself. Example:: > __locals__ with foo x = x+1; x = a+b end; [x=>a+b,foo=>foo] > f 99 when _=>f = ans!1 end; 100 The :macro:`__locals__` macro is useful for debugging purposes, as well as to implement dynamic environments. It is also used internally to implement the :macro:`reduce` macro, see `Eval and Friends`_. Here are some things that you should keep in mind when working with this macro: * :macro:`__locals__` always evaluates parameterless functions and returns the resulting value instead of a closure (as can be seen in the binding ``x=>a+b`` in the example above). Normally this is what you want, but it can be a problem with parameterless functions involving side effects. In such a case, if you want to evaluate the function at a later time, you'll either have to use a thunk or massage the local function so that it takes a dummy argument such as ``()``. * If the call to :macro:`__locals__` is inside a local function then that local function will itself be *excluded* from the constructed environment. This is done in order to prevent infinite recursion if the calling function does not have any parameters (which is a common idiom, especially in applications of the :macro:`reduce` macro). If you really want the calling function to be in the environment, you'll have to add it to the result of :macro:`__locals__` yourself. Using the :func:`__func__` primitive from above, we can implement this as a macro:: def __mylocals__ = [val (str __func__)=>__func__]+__locals__; You can then use ``__mylocals__`` instead of ``__locals__`` whenever you want the calling function to be included in the computed environment. * :macro:`__locals__` will use as keys in the resulting list whatever global symbols are in scope at the point of the call. By default, i.e., if no global symbol with the same print name as the local is visible at the point of the call, a symbol in the default namespace is used, as we've seen above. Otherwise the result may be also be a qualified symbol if such a symbol has already been declared or defined at the point of the call. For instance:: > namespace foo; > public foo; > __locals__ with foo x = x+1 end; [foo::foo=>foo] This behaviour may be a bit surprising at first sight, but is consistent with the way the interpreter performs its symbol lookup, see :ref:`Symbol Lookup and Creation` for details. The following functions allow you to inspect or modify the function, type, macro, constant and variable definitions of the running program. This uses a special meta representation for rewriting rules and definitions. Please see the :ref:`Macros` section in the Pure manual for details. Also note that these operations are subject to some limitations, please check the remarks concerning :func:`eval` and :func:`evalcmd` in the following subsection for details. .. function:: get_fundef sym get_typedef sym get_macdef sym If the given symbol is defined as a function, type or macro, return the corresponding list of rewriting rules. Otherwise return the empty list. .. function:: get_interface sym get_interface_typedef sym If the given symbol is defined as an interface type, return its definition; otherwise return the empty list. :func:`get_interface` returns the list of patterns used to declare the type, while :func:`get_interface_typedef` returns the actual list of type rules, in the same format as with :func:`get_typedef`. Note that the latter may be empty even if the type is defined, meaning that the type hasn't been instantiated yet, see :ref:`Interface Types` for details. Also note that Pure allows you to have *both* an interface and a regular (concrete) definition of a type, in which case :func:`get_typedef` and :func:`get_interface_typedef` may both return nonempty (and usually different) results. .. function:: get_vardef sym get_constdef sym If the given symbol is defined as a variable or constant, return the corresponding definition as a singleton list of the form ``[sym --> value]``. Otherwise return the empty list. The following functions may fail in case of error, in which case :func:`lasterr` is set accordingly (see `Eval and Friends`_ below). .. function:: add_fundef rules add_typedef rules add_macdef rules Add the given rewriting rules (given in the same format as returned by the :func:`get_fundef`, :func:`get_typedef` and :func:`get_macdef` functions above) to the running program. .. function:: add_fundef_at r rules add_typedef_at r rules add_macdef_at r rules Same as above, but add the given rewriting rules at (i.e., before) the given rule ``r`` (which must already exist, otherwise the call fails). Note that all added rules must have the same head symbol on the left-hand side, which matches the head symbol on the left-hand side of ``r``. .. function:: add_interface sym patterns Add the given patterns to the interface type ``sym`` (given as a symbol). If the interface type doesn't exist yet, it will be created. .. function:: add_interface_at sym p patterns Same as above, but add the given patterns at (i.e., before) the given pattern ``p`` (the given interface type must already exist and contain the given pattern, otherwise the call fails). .. function:: add_vardef rules add_constdef rules Define variables and constants. Each rule must take the form ``sym --> value`` with a symbol on the left-hand side (no pattern matching is performed by these functions). The following functions may be used to delete individual rewriting rules, interface type patterns or variable and constant symbols. .. function:: del_fundef rule del_typedef rule del_macdef rule Delete the given rewriting rule (given in the same format as returned by the :func:`get_fundef`, :func:`get_typedef` and :func:`get_macdef` functions) from the running program. Returns ``()`` if successful, fails otherwise. .. function:: del_interface sym pattern Delete the given pattern from the given interface type. Returns ``()`` if successful, fails otherwise. .. function:: del_vardef sym del_constdef sym Delete variables and constants, given by their (quoted) symbols. Returns ``()`` if successful, or fails if the symbol isn't defined (or defined as a different kind of symbol). The prelude also provides some functions to retrieve various attributes of a function symbol which determine how the operation is applied to its operands or arguments. These functions all take a single argument, the symbol or function object to be inspected, and return an integer value. .. function:: nargs x Get the argument count of a function object, i.e., the number of arguments it expects. Returns 0 for thunks and saturated applications, -1 for over-saturated applications and non-functions. .. function:: arity x Determine the arity of an operator symbol. The returned value is 0, 1 or 2 for nullary, unary and binary symbols, respectively, -1 for symbols without a fixity declaration or other kinds of objects. .. function:: fixity f Determine the fixity of an operator symbol. The fixity is encoded as an integer ``10*n+m`` where ``n`` is the precedence level (ranging from ``0`` to ``PREC_MAX``, where ``PREC_MAX`` denotes the precedence of primary expressions, 16777216 in the current implementation) and ``m`` indicates the actual fixity at each level, in the order of increasing precedence (0 = infix, 1 = infixl, 2 = infixr, 3 = prefix, 4 = postfix). The fixity value of nonfix and outfix symbols, as well as symbols without a fixity declaration, is always given as ``10*PREC_MAX``, and the same value is also reported for non-symbol objects. Infix, prefix and postfix symbols always have a :func:`fixity` value less than ``10*PREC_MAX``. (``PREC_MAX`` isn't actually defined as a constant anywhere, but you can easily do that yourself by setting ``PREC_MAX`` to the fixity value of any nonfix symbol or non-symbol value, e.g.: ``const PREC_MAX = fixity [];``) Note that only closures (i.e., named and anonymous functions and thunks) have a defined argument count in Pure, otherwise :func:`nargs` returns -1 indicating an unknown argument count. Partial applications of closures return the number of remaining arguments, which may be zero to indicate a `saturated` (but unevaluated) application, or -1 for `over-saturated` and constructor applications. (Note that in Pure a saturated application may also remain unevaluated because there is no definition for the given combination of arguments and thus the expression is in normal form, or because the application was quoted. If such a normal form application is then applied to some "extra" arguments it becomes over-saturated.) The value returned by :func:`nargs` always denotes the actual argument count of the given function, regardless of the declared arity if the function also happens to be an operator symbol. Often these will coincide (as, e.g., in the case of :func:`+` which is a binary operator and also expects two arguments). But this is not necessarily the case, as shown in the following example of a binary operator which actually takes *three* arguments:: > infix 0 oops; > (oops) x y z = x*z+y; > arity (oops); 2 > nargs (oops); 3 > nargs (5 oops 8); 1 > map (5 oops 8) (1..5); [13,18,23,28,33] Eval and Friends ~~~~~~~~~~~~~~~~ Pure provides some rather powerful operations to convert between Pure expressions and their string representation, and to evaluate quoted expressions (``'x``). The string conversions :func:`str`, :func:`val` and :func:`eval` also provide a convenient means to serialize Pure expressions, e.g., when terms are to be transferred to/from persistent storage. (Note, however, that this has its limitations. Specifically, some objects like pointers and anonymous functions do not have a parsable string representation. Also see the `Expression Serialization`_ section for some dedicated serialization operations which provide a more compact binary serialization format.) .. function:: str x Yields the print representation of an expression in Pure syntax, as a string. .. function:: val /string s Parses a single simple expression, specified as a string in Pure syntax, and returns the result as is, without evaluating it. Note that this is much more limited than the :func:`eval` operation below, as the expression must not contain any of the special constructs (conditional expressions, :keyword:`when`, :keyword:`with`, etc.), unless they are quoted. .. function:: eval x Parses any expression, specified as a string in Pure syntax, and returns its value. In fact, :func:`eval` can also parse and execute arbitrary Pure code. In that case it will return the last computed expression, if any. Alternatively, :func:`eval` can also be invoked on a (quoted) Pure expression, which is recompiled and then evaluated. Exceptions during evaluation are reported back to the caller. .. note:: The use of :func:`eval` and :func:`evalcmd` (as well as :func:`add_fundef`, :func:`add_typedef` etc. from the preceding subsection) to modify a running program breaks referential transparency and hence these functions should be used with care. Also, none of the inspection and mutation capabilities provided by these operations will work in batch-compiled programs, please check the :ref:`Batch Compilation` section in the Pure manual for details. Moreover, using these operations to modify or delete a function which is currently being executed results in undefined behaviour. .. function:: evalcmd x Like :func:`eval`, but allows execution of interactive commands and returns their captured output as a string. No other results are returned, so this operation is most useful for executing Pure definitions and interactive commands for their side-effects. (At this time, only the regular output of a few commands can be captured, most notably ``bt``, ``clear``, ``mem``, ``save`` and ``show``; otherwise the result string will be empty.) .. function:: lasterr Reports errors in :func:`val`, :func:`eval` and :func:`evalcmd` (as well as in :func:`add_fundef` et al, described in the previous subsection). This string value will be nonempty iff a compilation or execution error was encountered during the most recent invocation of these functions. In that case each reported error message is terminated with a newline character. .. function:: lasterrpos Gives more detailed error information. This returns a list of the individual error messages in :func:`lasterr`, along with the position of each error (if available). Each list item is either just a string (the error message, with any trailing newline stripped off) if no error position is available, or a tuple of the form ``msg,file,l1,c1,l2,c2`` where ``msg`` is the error message, ``file`` the name of the file containing the error (which will usually be ``""`` indicating that the error is in the source string, but may also be a proper filename of a module imported in the evaluated code), ``l1,c1`` denotes the beginning of the range with the errorneous construct (given as line and column indices) and ``l2,c2`` its end (or rather the character position following it). For convenience, both line and column indices are zero-based, in order to facilitate extraction of the text from the actual source string. .. note:: The indicated error positions are only approximate, and may in many cases span an entire syntactic construct (such as a subexpression or even an entire function definition) containing the error. Also, the end of the range may sometimes point one token past the actual end of the construct. (These limitations are due to technical restrictions in the parser; don't expect them to go away anytime soon.) Examples:: > str (1/3); "0.333333333333333" > val "1/3"; 1/3 > eval "1/3"; 0.333333333333333 > eval ('(1/3)); 0.333333333333333 > evalcmd "show evalcmd"; "extern expr* evalcmd(expr*);\n" > eval "1/3)"; eval "1/3)" > lasterr; ", line 1: syntax error, unexpected ')', expecting '=' or '|'\n" > lasterrpos; [(", line 1: syntax error, unexpected ')', expecting '=' or '|'", "",0,3,0,4)] In addition to :func:`str`, the prelude also provides the following function for pretty-printing the internal representation used to denote quoted specials. This is commonly used in conjunction with the :func:`__show__` function, please see the :ref:`Macros` section in the Pure manual for details. .. function:: __str__ x Pretty-prints special expressions. Example:: > __str__ ('__lambda__ [x __type__ int] (x+1)); "\\x::int -> x+1" The :func:`evalcmd` function is commonly used to invoke the ``show`` and ``clear`` commands for metaprogramming purposes. The prelude provides the following two convenience functions to make this easy: .. function:: globsym pat level This uses :func:`evalcmd` with the ``show`` command to list all defined symbols matching the given glob pattern. A definition level may be specified to restrict the context in which the symbol is defined; a level of 0 indicates that all symbols are eligible (see the description of the ``show`` command in the Pure manual for details). The result is the list of all matching (quoted) symbols. .. function:: clearsym sym level This uses :func:`evalcmd` with the ``clear`` command to delete the definition of the given symbol at the given definition level. No glob patterns are permitted here. The ``sym`` argument may either be a string or a literal (quoted) symbol. Example:: > let x,y = 77,99; > let syms = globsym "[a-z]" 0; syms; [x,y] > map eval syms; [77,99] > do (flip clearsym 0) syms; () > globsym "[a-z]" 0; [] > x,y; x,y The following functions are useful for doing symbolic expression simplification. .. macro:: reduce x Reevaluates an expression in a local environment. This dynamically rebinds function symbols in the given expression to whatever local function definitions are in effect at the point of the :macro:`reduce` call. Note that :macro:`reduce` is actually implemented as a macro which expands to the :func:`reduce_with` primitive (see below), using the :macro:`__locals__` builtin to enumerate the bindings which are in effect at the call site. .. function:: reduce_with env x Like :macro:`reduce` above, but takes a list of replacements (given as hash pairs ``u=>v``) as the first argument. The :macro:`reduce` macro expands to ``reduce_with __locals__``. The :macro:`reduce` macro provides a restricted form of dynamic binding which is useful to implement local rewriting rules. It is invoked without parameters and expands to the curried call ``reduce_with __locals__`` of the :func:`reduce_with` primitive, which takes one additional argument, the expression to be rewritten. The following example shows how to expand or factorize an expression using local rules for the laws of distributivity:: expand = reduce with (a+b)*c = a*c+b*c; a*(b+c) = a*b+a*c; end; factor = reduce with a*c+b*c = (a+b)*c; a*b+a*c = a*(b+c); end; expand ((a+b)*2); // yields a*2+b*2 factor (a*2+b*2); // yields (a+b)*2 Note that instances of locally bound functions are substituted back in the computed result, thus the instances of ``*`` and ``+`` in the results ``a*2+b*2`` and ``(a+b)*2`` shown above denote the corresponding globals, not the local incarnations of ``*`` and ``+`` defined in ``expand`` and ``factor``, respectively. :macro:`reduce` also adjusts to quoted arguments. In this case, the local rules are applied as usual, but back-substituted globals are *not* evaluated in the result:: > expand ((a+1)*2); a*2+2 > expand ('((a+1)*2)); a*2+1*2 Note that :macro:`reduce` only takes into account local *function* bindings from :keyword:`with` clauses, local *variable* bindings do not affect its operation in any way:: > let y = [x,x^2,x^3]; > reduce y when x = u+v end; [x,x^2,x^3] However, in such cases you can perform the desired substitution by turning the :keyword:`when` into a :keyword:`with` clause:: > reduce y with x = u+v end; [u+v,(u+v)^2,(u+v)^3] Or you can just invoke the underlying :func:`reduce_with` builtin directly, with the desired substitutions given as hash pairs in the first argument:: > reduce_with [x=>u+v] y; [u+v,(u+v)^2,(u+v)^3] It is always a good idea to confine calls to :macro:`reduce` to global functions if possible, since this gives you better control over which local functions are in scope at the point of the call. Otherwise it might be necessary to call :macro:`__locals__` manually and filter the resulting list before submitting it to the :func:`reduce_with` function. Expression Serialization ~~~~~~~~~~~~~~~~~~~~~~~~ Like :func:`str` and :func:`eval`, the following :func:`blob` and :func:`val` operations can be used to safely transfer expression data to/from persistent storage and between different processes (using, e.g., POSIX shared memory, pipes or sockets). However, :func:`blob` and :func:`val` use a binary format which is usually much more compact and gets processed much faster than the string representations used by :func:`str` and :func:`eval`. Also, :func:`val` offers some additional protection against transmission errors through a crc check. (The advantage of the string representation, however, is that it's readable plain text in Pure syntax.) .. function:: blob x Stores the contents of the given expression as a binary object. The return value is a cooked pointer which frees itself when garbage-collected. .. function:: val /blob p Reconstructs a serialized expression from the result of a previous invocation of the :func:`blob` function. .. function:: blobp p Checks for a valid :func:`blob` object. (Note that :func:`val` may fail even if :func:`blobp` returns ``true``, because for performance reasons :func:`blobp` only does a quick plausibility check on the header information of the blob, whereas :func:`val` also performs a crc check and verifies data integrity.) .. function:: prefix # /blob p blob_size p blob_crc p Determines the size (in bytes) and crc checksum of a blob, respectively. :func:`blob_size` always returns a bigint, :func:`blob_crc` a machine int (use :func:`uint` on the latter to get a proper unsigned 32 bit value). For convenience, ``#p`` is defined as an alias for ``blob_size p`` on :func:`blob` pointers. Example:: > let b = blob {"Hello, world!", 1/3, 4711, NULL}; > b; #b; uint $ blob_crc b; # 148L 3249898239L > val b; {"Hello, world!",0.333333333333333,4711,#} Please note that the current implementation has some limitations: * Just as with :func:`str` and :func:`eval`, runtime data (local closures and pointers other than the :const:`NULL` pointer) can't be serialized, causing :func:`blob` to fail. However, it *is* possible to transfer a global function, provided that the function exists (and is the same) in both the sending and the receiving process. (This condition can't be verified by :func:`val` and thus is at the programmer's responsibilty.) * Sharing of subexpressions will in general be preserved, but sharing of list and tuple *tails* will be lost (unless the entire list or tuple is shared). * The :func:`val` function may fail to reconstruct the serialized expression even for valid blobs, if there is a conflict in symbol fixities between the symbol tables of the sending and the receiving process. To avoid this, make sure that symbol declarations in the sending and the receiving script match up. Other Special Primitives ~~~~~~~~~~~~~~~~~~~~~~~~ .. function:: exit status Terminate the program with the given status code. .. function:: throw x Throw an exception, cf. :ref:`Exception Handling`. .. function:: __break__ __trace__ Trigger the debugger from a Pure program, cf. :ref:`Debugging`. Note that these routines only have an effect if the interpreter is run in debugging mode, otherwise they are no-ops. The debugger will be invoked at the next opportunity (usually when a function is called or a reduction is completed). .. function:: force x Force a thunk (``x&``), cf. :ref:`Special Forms`. This usually happens automagically when the value of a thunk is needed. .. Pointer Operations ~~~~~~~~~~~~~~~~~~ The prelude provides a few basic operations on pointers which make it easy to interface to external C functions. For more advanced uses, the library also includes the :mod:`pointers` module which can be imported explicitly if needed, see `Pointer Arithmetic`_ below. .. function:: addr symbol Get the address of a C symbol (given as a string) at runtime. The library containing the symbol must already be loaded. Note that this can in fact be any kind of externally visible C symbol, so it's also possible to get the addresses of global variables. The result is returned as a pointer. The function fails if the symbol was not found. .. function:: calloc nmembers size malloc size realloc ptr size free ptr Interface to ``malloc``, ``free`` and friends. These let you allocate dynamic buffers (represented as Pure pointer values) for various purposes. .. The following functions perform direct memory accesses through pointers. Their primary use is to interface to certain C library functions which take or return data through pointers. It goes without saying that these operations should be used with utmost care. No checking is done on the pointer types, so it is the programmer's responsibility to ensure that the pointers actually refer to the corresponding type of data. .. function:: get_byte ptr get_short ptr get_int ptr get_int64 ptr get_long ptr get_float ptr get_double ptr get_string ptr get_pointer ptr Return the integer, floating point, string or generic pointer value at the memory location indicated by ``ptr``. .. function:: put_byte ptr x put_short ptr x put_int ptr x put_int64 ptr x put_long ptr x put_float ptr x put_double ptr x put_string ptr x put_pointer ptr x Change the integer, floating point, string or generic pointer value at the memory location indicated by ``ptr`` to the given value ``x``. .. Sentries ~~~~~~~~ Sentries are Pure's flavour of object `finalizers`. A sentry is simply an object (usually a function) which gets applied to the target expression when it is garbage-collected. This is useful to perform automatic cleanup actions on objects with internal state, such as files. Pure's sentries are *much* more useful than finalizers in other garbage-collected languages, since it is guaranteed that they are called as soon as an object "goes out of scope", i.e., becomes inaccessible. .. function:: sentry f x Places a sentry ``f`` at an expression ``x`` and returns the modified expression. .. function:: clear_sentry x Removes the sentry from an expression ``x``. .. function:: get_sentry x Returns the sentry of an expression ``x`` (if any, fails otherwise). As of Pure 0.45, sentries can be placed on any Pure expression. The sentry itself can also be any type of object (but usually it's a function). Example:: > using system; > sentry (\_->puts "I'm done for!") (1..3); [1,2,3] > clear ans I'm done for! Note that setting a finalizer on a global symbol won't usually be of much use since such values are cached by the interpreter. (However, the sentry *will* be invoked if the symbol gets recompiled because its definition has changed. This may be useful for some purposes.) In Pure parlance, we call an expression `cooked` if a sentry has been attached to it. The following predicate can be used to check for this condition. Also, there is a convenience function to create cooked pointers which take care of freeing themselves when they are no longer needed. .. function:: cookedp x Check whether a given object has a sentry set on it. .. function:: cooked ptr Create a pointer which disposes itself after use. This is just a shorthand for ``sentry free``. The given pointer ``ptr`` must be :func:`malloc`\ ed to make this work. Example:: > using system; > let p = cooked (malloc 1024); > cookedp p; 1 > get_sentry p; free > clear p Besides their use as finalizers, sentries can also be handy in other circumstances, when you need to associate an expression with another, "invisible" value. In this case the sentry is usually some kind of data structure instead of a function to be executed at finalization time. For instance, here's how we can employ sentries to implement hashing of function values:: using dict; hashed f x = case get_sentry f of h::hdict = h!x if member h x; _ = y when y = f x; sentry (update h x y) f when h = case get_sentry f of h::hdict = h; _ = emptyhdict end; end; end; end; E.g., consider the naive recursive definition of the Fibonacci function:: fib n::int = if n<=1 then 1 else fib (n-1)+fib (n-2); A hashed version of the Fibonacci function can be defined as follows:: let hfib = hashed f with f n::int = if n<=1 then 1 else hfib (n-1)+hfib (n-2) end; This turns the naive definition of the Fibonacci function (which has exponential time complexity) into a linear time operation:: > stats > fib 35; 14930352 4.53s > hfib 35; 14930352 0.25s Finally, note that there can be only one sentry per expression but, building on the operations provided here, it's easy to design a scheme where sentries are chained. For instance:: chain_sentry f x = sentry (h (get_sentry x)) x with h g x = g x $$ f x; end; This invokes the original sentry before the chained one:: > using system; > f _ = puts "sentry#1"; g _ = puts "sentry#2"; > let p = chain_sentry g $ sentry f $ malloc 10; > clear p sentry#1 sentry#2 You can chain any number of sentries that way. This scheme should work in most cases in which sentries are used just as finalizers. However, there are other uses, like the "hashed function" example above, where you'd like the original sentry to stay intact. This can be achieved by placing the new sentry as a sentry on the *original sentry* rather than the expression itself:: attach_sentry f x = sentry (sentry f (get_sentry x)) x; This requires that the sentry will actually be garbage-collected when its hosting expression gets freed, so it will *not* work if the original sentry is a global:: > let p = attach_sentry g $ sentry f $ malloc 10; > clear p sentry#1 However, the attached sentry will work ok if you can ensure that the original sentry is a (partial or constructor) application. E.g.:: > let p = attach_sentry g $ sentry (f$) $ malloc 10; > clear p sentry#1 sentry#2 .. _Tagged Pointers: Tagged Pointers ~~~~~~~~~~~~~~~ As of Pure 0.45, the C interface now fully checks pointer parameter types at runtime (see the :ref:`C Types` section in the Pure Manual for details). To these ends, pointer values are internally tagged to keep track of the pointer types. The operations described in this section give you access to these tags in Pure programs. At the lowest level, a pointer tag is simply a machine int associated with a pointer value. The default tag is 0, which denotes a generic pointer value, i.e., ``void*`` in C. The following operations are provided to create such tags, and set, get or verify the tag of a pointer value. .. function:: ptrtag t x Places an integer tag ``t`` at an expression ``x`` and returns the modified expression. ``x`` must be a pointer value. .. function:: get_ptrtag x Retrieves the tag associated with ``x``. .. function:: check_ptrtag t x Compares the tag associated with ``x`` against ``t`` and returns true iff the tags match. If ``x`` is a pointer value, this is equivalent to ``get_ptrtag x==t || null x && get_ptrtag x==0``. .. function:: make_ptrtag Returns a new, unique tag each time it is invoked. Examples:: > let p = malloc 10; > get_ptrtag p; // zero by default 0 > let t = make_ptrtag; t; 12 > ptrtag t p; # > get_ptrtag p; 12 > check_ptrtag t p; 1 > check_ptrtag 0 p; 0 Note that in the case of a non-:const:`NULL` pointer, :func:`check_ptrtag` just tests the tags for equality. On the other hand, a generic :const:`NULL` pointer, like in C, is considered compatible with all pointer types:: > let t1 = make_ptrtag; t1; 13 > check_ptrtag t1 p; 0 > check_ptrtag t1 NULL; 1 > get_ptrtag NULL; 0 .. The operations above are provided so that you can design your own, more elaborate type systems for pointer values if the need arises. However, you'll rarely have to deal with pointer tags at this level yourself. For most applications, it's enough to inspect the type of a Pure pointer and maybe modify it by "casting" it to a new target type. The following high-level operations provide these capabilities. .. function:: pointer_tag ty pointer_tag x Returns the pointer tag for the given type ``ty``, denoted as a string, or the given pointer value ``x``. In the former case, the type should be specified in the C-like syntax used in :keyword:`extern` declarations; a new tag will be created using :func:`make_ptrtag` if needed. In the latter case, :func:`pointer_tag` simply acts as a frontend for :func:`get_ptrtag` above. .. function:: pointer_type tag pointer_type x Returns the type name associated with the given int value ``tag`` or pointer value ``x``. Please note that this may be :const:`NULL` in the case of an "anonymous" tag, which may have been created with :func:`make_ptrtag` above, or if the tag is simply unknown because it hasn't been created yet. .. function:: pointer_cast tag x pointer_cast ty x Casts ``x`` (which must be a pointer value) to the given pointer type, which may be specified either as a tag or a string denoting the type name. This returns a new pointer value with the appropriate type tag on it (the tag on the original pointer value ``x`` isn't affected by this operation). Example:: > let p = malloc 10; > let q = pointer_cast "char*" p; > map pointer_type [p,q]; ["void*","char*"] > map pointer_tag [p,q]; [0,1] > map pointer_type (0..make_ptrtag-1); ["void*","char*","void**","char**","short*","short**","int*","int**", "float*","float**","double*","double**"] (The last command shows a quick and dirty way to retrieve the currently defined type tags in the interpreter. This won't work in batch-compiled scripts, however, since in this case the range of type tags is in general non-contiguous.) If you have to do many casts to a given type, you can avoid the overhead of repeatedly looking up the type name by assigning the tag to a variable, which can then be passed to :func:`pointer_cast` instead:: > let ty = pointer_tag "long*"; > pointer_cast ty p, pointer_cast ty q; Note that you have to be careful when casting a cooked pointer, because :func:`pointer_cast` may have to create a copy of the original pointer value in order not to clobber the original type tag. The sentry will then still be with the original cooked pointer value, thus you have to ensure that this value survives its type-cast duplicate. It's usually best to apply the cast right at the spot where the pointer gets passed to an external function, e.g.:: > extern char *gets(char*); > let p = cooked $ malloc 1000; > gets (pointer_cast "char*" p); Such usage is always safe. If this approach isn't possible, you might want to use the lowlevel :func:`ptrtag` operation instead. (This will clobber the type tag of the pointer, but you can always change it back afterwards.) .. _Expression References: Expression References ~~~~~~~~~~~~~~~~~~~~~ Expression references provide a kind of mutable data cells which can hold any Pure expression. If you need these, then you're doomed. ;-) However, they can be useful as a last resort when you need to keep track of some local state or interface to the messy imperative world. Pure's references are actually implemented as expression pointers so that you can readily pass them as pointers to a C function which expects a ``pure_expr**`` parameter. This may even be useful at times. .. type:: ref /type The type of expression references. This is a subtype of the :type:`pointer/type` type. .. function:: ref x Create a reference pointing to ``x`` initially. .. function:: put r x Set a new value ``x``, and return that value. .. function:: get r Retrieve the current value ``r`` points to. .. function:: unref r Purge the referenced object and turn the reference into a dangling pointer. (This is used as a sentry on reference objects and shouldn't normally be called directly.) .. function:: refp x Predicate to check for reference values. Note that manually changing or removing the :func:`unref` sentry of a reference turns the reference into just a normal pointer object and renders it unusable as a reference. Doing this will also leak memory, so don't! There is another pitfall with expression references, namely that they can be used to create cyclic chains which currently can't be reclaimed by Pure's reference-counting garbage collector. For instance:: > using system; > done r = printf "done %s\n" (str r); > let x = ref (); > let y = ref (sentry done 2,x); > put x (sentry done 1,y); 1,# At this point ``x`` points to ``y`` and vice versa. If you now purge the ``x`` and ``y`` variables then Pure won't be able to reclaim the cycle, resulting in a memory leak (you can verify this by noting that the sentries are not being called). To prevent this, you'll have to break the cycle first:: > put y 3; done 2 3 > clear x y done 1 Note that, in a way, sentries work similar to expression references and thus the same caveats apply there. Having a limited amount of cyclic references won't do any harm. But if they can grow indefinitely then they may cause problems with long-running programs due to memory leakage, so it's a good idea to avoid such cycles if possible. .. module:: pointers Pointer Arithmetic ~~~~~~~~~~~~~~~~~~ The pointers.pure module provides the usual C-style pointer arithmetic and comparisons of pointer values. This module normally is not included in the prelude, so to use these operations, you have to add the following import declaration to your program:: using pointers; The module overloads the comparison and some of the arithmetic operators (cf. Arithmetic_) so that they can be used to compare pointers and to perform C-style pointer arithmetic. To these ends, some conversions between pointers and numeric types are also provided. .. function:: int /pointer p bigint /pointer p Convert a pointer to an int or bigint, giving its numeric address value, which usually denotes a byte offset relative to the beginning of the memory of the executing process. This value can then be used in arithmetic operations and converted back to a pointer using the :func:`pointer` function from the prelude. (Note that to make this work on 64 bit systems, you'll have to convert the pointer values to bigints.) .. function:: infix + /pointer p n infix - /pointer p n infix - /pointerdiff p q Pointer arithmetic. ``p+n`` and ``p-n`` offsets a pointer ``p`` by the given integer ``n`` denoting the amount of bytes. In addition, ``p-q`` returns the byte offset between two pointers ``p`` and ``q``. Note that, in contrast to C pointer arithmetic which also takes into account the base type of the pointer, the Pure operations always use byte offsets, no matter what type of pointer (as given by the pointer tag) is passed to these operations. .. function:: infix == /pointer p q infix ~= /pointer p q Pointer equality and inequality. This is exactly the same as syntactic equality on pointers. .. function:: infix <= /pointer p q infix >= /pointer p q infix > /pointer p q infix < /pointer p q Pointer comparisons. One pointer ``p`` is considered to be "less" than another pointer ``q`` if it represents a "lower" address in memory, i.e., if the byte offset ``p-q`` is negative. .. Mathematical Functions ====================== .. module:: math The math.pure module provides Pure's basic math routines. It also defines complex and rational numbers. Imports ------- To use the operations of this module, add the following import declaration to your program:: using math; Basic Math Functions -------------------- The module defines the following real-valued constants: .. constant:: e = 2.71828... Euler's number. .. constant:: pi = 3.1415... Ludolph's number. It also provides a reasonably comprehensive (pseudo) random number generator which uses the `Mersenne twister`_ to avoid bad generators present in some C libraries. Please note that as of Pure 0.41, the runtime library includes a newer release of the Mersenne twister which fixes issues with some kinds of seed values, and will yield different values for given seeds. Also, the :func:`random31` and :func:`random53` functions have been added as a convenience to compute unsigned 31 bit integers and 53 bit double values, and the :func:`srandom` function now also accepts an int matrix as seed value. .. _Mersenne twister: http://www.math.sci.hiroshima-u.ac.jp/~m-mat/MT/emt.html .. function:: random Return 32 bit pseudo random ints in the range ``-0x80000000..0x7fffffff``. .. function:: random31 Return 31 bit pseudo random ints in the range ``0..0x7fffffff``. .. function:: random53 Return pseudo random doubles in the range ``[0,1)`` with 53 bits resolution. .. function:: srandom seed Sets the seed of the generator to the given 32 bit integer. You can also specify longer seeds using a nonempty row vector, e.g.: ``srandom {0x123, 0x234, 0x345, 0x456}``. .. The following functions work with both double and int/bigint arguments. The result is always a double. For further explanations please see the descriptions of the corresponding functions from the C math library. .. function:: sqrt x The square root function. .. function:: exp x ln x log x Exponential function, natural and decadic logarithms. .. function:: sin x cos x tan x Trigonometric functions. .. function:: asin x acos x atan x Inverse trigonometric functions. .. function:: atan2 y x Computes the arcus tangent of ``y/x``, using the signs of the two arguments to determine the quadrant of the result. .. function:: sinh x cosh x tanh x Hyperbolic trigonometric functions. .. function:: asinh x acosh x atanh x Inverse hyperbolic trigonometric functions. .. Complex Numbers --------------- .. function:: infix +: x y infix <: r t Complex number constructors. .. constant:: i = 0+:1 Imaginary unit. We provide both rectangular (``x+:y``) and polar (``r<:a``) representations, where ``(x,y)`` are the Cartesian coordinates and ``(r,t)`` the radius (absolute value) and angle (in radians) of a complex number, respectively. The :func:`+:` and :func:`<:` constructors (declared in the prelude) bind weaker than all other arithmetic operators and are non-associative. The polar representation ``r<:t`` is normalized so that ``r`` is always nonnegative and ``t`` falls in the range ``-pi using math; > let z = 2^(1/i); z; 0.769238901363972+:-0.638961276313635 > let z = ln z/ln 2; z; 0.0+:-1.0 > abs z, arg z; 1.0,-1.5707963267949 > polar z; 1.0<:-1.5707963267949 Please note that, as the :func:`+:` and :func:`<:` constructors bind weaker than the other arithmetic operators, complex numbers *must* be parenthesized accordingly, e.g.:: > (1+:2)*(3+:4); -5+:10 .. Rational Numbers ---------------- .. function:: infix % x y Exact division operator and rational number constructor. Pure's rational numbers are constructed with the `exact division` operator :func:`%` (declared in the prelude) which has the same precedence and fixity as the other division operators. The :func:`%` operator returns a rational or complex rational for any combination of integer, rational and complex integer/rational arguments, provided that the denominator is nonzero (otherwise it behaves like ``x div 0``, which will raise an exception). Machine int operands are always promoted to bigints, thus normalized rationals always take the form ``x%y`` where both the numerator ``x`` and the denominator ``y`` are bigints. For other numeric operands :func:`%` works just like :func:`/`. Rational results are normalized so that the sign is always in the numerator and numerator and denominator are relatively prime. In particular, a rational zero is always represented as ``0L%1L``. The usual arithmetic operations and equality/order relations are extended accordingly, as well as the `basic math functions`_ and the `rounding functions`_, and will return exact (rational or complex rational) results where appropriate. Rational operations are implemented using the GMP bigint functions where possible, and thus are reasonably fast. In addition, the module also provides following operations: .. function:: rational x Converts a real or complex value ``x`` to a rational or complex rational. Note that the conversion from double values doesn't do any rounding, so it is guaranteed that converting the resulting rational back to a double reconstructs the original value. Conversely, the :func:`int`, :func:`bigint`, :func:`double`, :func:`complex`, :func:`rect`, :func:`polar` and :func:`cis` conversion functions are overloaded so that they convert a rational to one of the other number types. .. function:: num x den x Numerator and denominator of a rational ``x``. .. Examples:: > using math; > 5%7 + 2%3; 29L%21L > 3%8 - 1%3; 1L%24L > pow (11%10) 3; 1331L%1000L > let x = pow 3 (-3); x; 1L%27L > num x, den x; 1L,27L > rational (3/4); 3L%4L Note that doubles can't represent most rationals exactly, so conversion from double to rational *will* yield funny results in many cases (which are still accurate up to rounding errors). For instance:: > let x = rational (1/17); x; 4238682002231055L%72057594037927936L > num x/den x; 0.0588235294117647 > double (1%17); 0.0588235294117647 .. Semantic Number Predicates and Types ------------------------------------ In difference to the syntactic predicates in Primitives_, these check whether the given value can be represented as an object of the given target type (up to rounding errors). Note that if ``x`` is of syntactic type ``X``, then it is also of semantic type ``X``. Moreover, ``intvalp x => bigintvalp x => ratvalp x => realvalp x => compvalp x <=> numberp x``. .. function:: compvalp x Check for complex values (this is the same as :func:`numberp`). .. function:: realvalp x Check for real values (``im x==0``). .. function:: ratvalp x Check for rational values (same as :func:`realvalp`, except that IEEE 754 infinities and NaNs are excluded). .. function:: bigintvalp x Check for "big" integer values which can be represented as a bigint. .. function:: intvalp x Check for "small" integer values which can be represented as a machine int. .. .. type:: compval realval ratval bigintval intval Convenience types for the above predicates. These can be used as type tags on the left-hand side of an equation to match numeric values for which the corresponding predicate yields :const:`true`. .. module:: enum Enumerated Types ================ `Enumerated types`, or `enumerations` for short, are algebraic types consisting only of nullary constructor symbols. The operations of this module equip such types with the necessary function definitions so that the members of the type can be employed in arithmetic operations, comparisons, etc. in the same way as the predefined enumerated types such as integers and characters. This also includes support for arithmetic sequences. Please note that this module is not included in the prelude by default, so you have to use the following import declaration to get access to its operations:: using enum; Also note that the :func:`enum` and :func:`defenum` functions use meta-programming to modify the running program, which only works when running in the interpreter. Thus, if a script using these functions is to be compiled to a native executable, you need to make sure that calls to :func:`enum` and :func:`defenum` are invoked at compile time. The ``const`` keyword does this for you, e.g.:: const enum day; This isn't necessary if the script runs in the interpreter, but it won't hurt there either, so to be on the safe side, it is recommended to just always use ``const`` with these operations. The following operations are provided: .. function:: enum sym The given symbol must denote an algebraic type consisting only of nonfix symbols. :func:`enum` adds the necessary rules for making members of the type work with enumerated type operations such as :func:`ord`, :func:`succ`, :func:`pred`, comparisons, basic arithmetic and arithmetic sequences. It also defines ``sym`` as an ordinary function, called the `enumeration function` of the type, which maps ordinal numbers to the corresponding members of the type (``sym 0`` yields the first member of the type, ``sym 1`` the second, etc.). The members of the type are in the same order as given in the definition of the type. .. function:: defenum sym [symbols,...] A convenience function which declares a type ``sym`` with the given elements and invokes :func:`enum` on it to make it enumerable in one go. .. function:: enumof sym Given a member of an enumerated type as defined with :func:`enum`, this returns the enumeration function of the type. Rules for this function are generated automatically by :func:`enum`. .. type:: enum /type The type of all enumerated type members. This is actually implemented as an interface type. It matches members of all enumerated types constructed with :func:`enum`. .. function:: enump x Predicate to check for enumerated type members. For instance, consider:: nonfix sun mon tue wed thu fri sat; type day sun | day mon | day tue | day wed | day thu | day fri | day sat; Once the type is defined, we can turn it into an enumeration simply as follows:: const enum day; There's also a convenience function :func:`defenum` which defines the type and makes it enumerable in one go:: const defenum day [sun,mon,tue,wed,thu,fri,sat]; In particular, this sets up the functions ``day`` and ``ord`` so that you can convert between members of the ``day`` type and the corresponding ordinals:: > ord sun; 0 > day (ans+3); wed You can also retrieve the type of an enumerated type member (or rather its enumeration function) with :func:`enumof`:: > enumof sun; day > ans 5; fri Basic arithmetic, comparisons and arithmetic sequences also work as usual, provided that the involved members are all from the same enumeration:: > succ mon; tue > pred sat; fri > sun+3; wed > fri-2; wed > fri-tue; 3 > mon..fri; [mon,tue,wed,thu,fri] > sun:tue..sat; [sun,tue,thu,sat] > sat:fri..mon; [sat,fri,thu,wed,tue,mon] Note that given one member of the enumeration, you can use :func:`enumof` to quickly enumerate *all* members of the type starting at the given member. Here's a little helper function which does this:: enumerate x::enum = iterwhile (typep ty) succ x when ty = enumof x end; For instance:: > enumerate sun; [sun,mon,tue,wed,thu,fri,sat] Also note that :func:`enum` silently skips elements which are already enumerated type members (no matter whether of the same or another type). Thus if you later add more elements to the ``day`` type, you can just call :func:`enum` again to update the enumeration accordingly:: > succ sat; sat+1 > type day doomsday; > enum day; () > succ sat; doomsday .. Container Types =============== The standard library provides a variety of efficient container data structures for different purposes. These are all purely functional, i.e., immutable data structures implemented using different flavours of binary trees. This means that instead of modifying a data structure in-place, operations like insertion and deletion return a new instance of the container, keeping the previous instance intact. Nevertheless, all operations are performed efficiently, in logarithmic time where possible. The container types are all implemented as abstract data structures, so client modules shouldn't rely on the internal representation. Each type provides a corresponding type tag (cf. :ref:`Type Tags` in the Pure Manual), as given in the description of each type, which can be used to match values of the type, e.g.:: shift a::array = rmfirst a; All container types implement the equality predicates :func:`==` and :func:`~=` by recursively comparing their members. In addition, the dictionary, set and bag data structures also provide the other comparison predicates (:func:`<`, :func:`<=` etc.) which check whether one dictionary, set or bag is contained in another. .. module:: array Arrays ------ The array.pure module implements an efficient functional array data structure which allows to access and update individual array members, as well as to add and remove elements at the beginning and end of an array. All these operations are carried out in logarithmic time. .. type:: array /type The array data type. Imports ~~~~~~~ To use the operations of this module, add the following import declaration to your program:: using array; Operations ~~~~~~~~~~ .. function:: emptyarray return the empty array .. function:: array xs create an array from a list ``xs`` .. function:: array2 xs create a two-dimensional array from a list of lists .. function:: mkarray x n create an array consisting of ``n`` ``x``'s .. function:: mkarray2 x (n,m) create a two-dimensional array of ``n*m`` ``x``'s .. function:: arrayp x check whether ``x`` is an array .. function:: prefix # /array a size of ``a`` .. function:: infix ! /array a i return the ``i``\ th member of ``a`` .. function:: infix ! /array a (i,j) two-dimensional subscript .. function:: null /array a test whether ``a`` is the empty array .. function:: members /array a list /array a list of values stored in ``a`` .. function:: members2 /array a list2 /array a list of members in a two-dimensional array .. function:: first /array a last /array a first and last member of ``a`` .. function:: rmfirst /array a rmlast /array a remove first and last member from ``a`` .. function:: insert /array a x insert ``x`` at the beginning of ``a`` .. function:: append /array a x append ``x`` to the end of ``a`` .. function:: update /array a i x replace the ``i``\ th member of ``a`` by ``x`` .. function:: update2 /array a (i,j) x update two-dimensional array Examples ~~~~~~~~ Import the module:: > using array; A one-dimensional array:: > let a::array = array (0.0:0.1..1.0); > #a; members a; 11 [0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0] Indexing an array works in the usual way, using Pure's :func:`\!` operator. By virtue of the prelude, slicing an array with :func:`\!\!` also works as expected:: > a!5; 0.5 > a!!(3..7); [0.3,0.4,0.5,0.6,0.7] Updating a member of an array produces a new array:: > let b::array = update a 1 2.0; > members b; [0.0,2.0,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0] Two-dimensional arrays can be created with :func:`array2` from a list of lists:: > let a2::array = array2 [[i,x | x = [u,v,w]] | i = 1..2]; > members2 a2; [[(1,u),(1,v),(1,w)],[(2,u),(2,v),(2,w)]] > a2!(1,2); 2,w > a2!![(0,1),(1,2)]; [(1,v),(2,w)] > a2!!(0..1,1..2); [[(1,v),(1,w)],[(2,v),(2,w)]] Here's how to convert an array to a Pure matrix:: > matrix $ members a; {0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0} > matrix $ members2 a2; {(1,u),(1,v),(1,w);(2,u),(2,v),(2,w)} Converting back from a matrix to an array:: > let b2::array = array2 $ list2 {(1,u),(1,v),(1,w);(2,u),(2,v),(2,w)}; > members2 b2; [[(1,u),(1,v),(1,w)],[(2,u),(2,v),(2,w)]] .. module:: heap Heaps ----- Heaps are a kind of priority queue data structure which allows quick (constant time) access to the smallest member, and to remove the smallest member and insert new elements in logarithmic time. Our implementation does not allow quick update of arbitrary heap members; if such functionality is required, bags can be used instead (see `Sets and Bags`_). Heap members *must* be ordered by the :func:`<=` predicate. Multiple instances of the same element may be stored in a heap; however, the order in which equal elements are retrieved is not specified. .. type:: heap /type The heap data type. Imports ~~~~~~~ To use the operations of this module, add the following import declaration to your program:: using heap; Operations ~~~~~~~~~~ .. function:: emptyheap return the empty heap .. function:: heap xs create a heap from a list ``xs`` .. function:: heapp x check whether ``x`` is a heap .. function:: prefix # /heap h size of a heap .. function:: null /heap h test whether ``h`` is the empty heap .. function:: members /heap h list /heap h list the members of ``h`` in ascending order .. function:: first /heap h the first (i.e., smallest) member of ``h`` .. function:: rmfirst /heap h remove the first (i.e., smallest) member from ``h`` .. function:: insert /heap h x insert ``x`` into ``h`` Examples ~~~~~~~~ :: > let h::heap = heap [5,1,3,11,3]; > members h; [1,3,3,5,11] > first h; 1 > members $ rmfirst h; [3,3,5,11] .. module:: dict Dictionaries ------------ The dict.pure module provides Pure's dictionary data types based on AVL trees. There are actually four different types to choose from, depending on whether you need ordered or hashed dictionaries and whether multiple values for the same key should be allowed or not. .. type:: dict /type An ordered dictionary. This assumes an ordered key type, i.e., the predicate :func:`<` must be defined on the keys. .. type:: hdict /type A hashed dictionary which works with any (mixture of) key types but stores members in an apparently random order. .. type:: mdict /type An ordered dictionary, like :type:`dict/type`, which allows multiple values to be associated with the same key. .. type:: hmdict /type A multi-valued dictionary, like :type:`mdict/type`, but uses hashed keys like :type:`hdict/type`. .. type:: xdict /type This is just an abstract supertype for matching any kind of dictionary provided by this module. :type:`mdict/type` and :type:`hmdict/type` are also colloquially referred to as (ordered or hashed) *multidicts*. This implementation guarantees that different members for the same key are always kept in the order in which they were inserted, and this is also the order in which they will be retrieved by the :func:`members/dict`, :func:`keys/dict`, :func:`vals/dict` and indexing operations. The usual comparison predicates (:func:`==`, :func:`~=`, :func:`<=`, :func:`<` etc.) are defined on all dictionary types, where two dictionaries are considered "equal" (``d1==d2``) if they both contain the same ``key=>value`` pairs, and ``d1<=d2`` means that ``d1`` is a sub-dictionary of ``d2``, i.e., all ``key=>value`` pairs of ``d1`` are also contained in ``d2`` (taking into account multiplicities in the multidict case). Ordered dictionaries compare keys using equality (assuming two keys ``a`` and ``b`` to be equal if neither ``avalue``, or from another dictionary; in the latter case the argument is converted to a dictionary of the desired target type .. function:: dictp d hdictp d mdictp d hmdictp d check whether ``d`` is a dictionary of the corresponding type .. function:: mkdict y xs mkhdict y xs mkmdict y xs mkhmdict y xs create a dictionary from a list of keys and a constant value .. function:: infix + /dict d1 d2 sum: ``d1+d2`` adds the members of ``d2`` to ``d1`` .. function:: infix - /dict d1 d2 difference: ``d1-d2`` removes the members of ``d2`` from ``d1`` .. function:: infix * /dict d1 d2 intersection: ``d1*d2`` removes the members *not* in ``d2`` from ``d1`` .. function:: prefix # /dict d size of a dictionary (the number of members it contains) .. function:: infix ! /dict d x get the value from ``d`` by key ``x``; in the case of a multidict this actually returns a list of values (which may be empty if ``d`` doesn't contain ``x``) .. function:: null /dict d test whether ``d`` is an empty dictionary .. function:: member /dict d x test whether ``d`` contains a member with key ``x`` .. function:: members /dict d list /dict d list the members of ``d`` (in ascending order for ordered dictionaries) .. function:: keys /dict d list the keys of ``d`` (in ascending order for ordered dictionaries) .. function:: vals /dict d list the values of ``d`` .. function:: first /dict d last /dict d return the first and the last member of ``d``, respectively .. function:: rmfirst /dict d rmlast /dict d remove the first and the last member from ``d``, respectively .. function:: insert /dict d (x=>y) update /dict d x y insert ``x=>y`` into ``d`` (this always adds a new member in a multidict, otherwise it replaces an existing value if there is one); note that :func:`update/dict` is just a fully curried version of :func:`insert/dict`, so ``update d x y`` behaves exactly like ``insert d (x=>y)`` .. function:: delete /dict d x remove ``x`` from ``d`` if present (in the multidict case, only the first member with the given key ``x`` is removed) .. function:: delete_val /dict d (x=>y) remove a specific key-value pair ``x=>y`` from ``d`` if present (in the multidict case, only the first instance of ``x=>y`` is removed); please also see the notes below regarding this operation .. function:: delete_all /dict d x remove all instances of ``x`` from ``d`` (in the non-multidict case, this is just the same as :func:`delete/dict`) .. note:: * The infix operators :func:`+/dict`, :func:`-/dict` and :func:`*\/dict` work like the corresponding set and bag operations (see `Sets and Bags`_), treating dictionaries as collections of ``key=>val`` pairs. You can mix arbitrary operand types with these operations, as well as with the comparison operations; the necessary conversions from less general dictionary types (ordered, single-valued) to more general types (hashed, multi-valued) are handled automatically. * The :func:`delete_val/dict` function compares values using equality (:func:`==`) if it is defined, falling back to syntactic equality (:func:`===`) otherwise. If there is more than one instance of the given value under the given key, the first such instance will be removed (which, if :func:`==` is defined on the values, may be any instance that compares equal, not necessarily an exact match). * In the multidict case, :func:`delete_val/dict` may require linear time with respect to the number of different values stored under the given key. Since this operation is also needed to implement some other multidict operations like comparisons, difference and intersection, these may end up requiring quadratic running times in degenerate cases (i.e., if the majority of members happens to be associated with only very few keys). Examples ~~~~~~~~ A normal (ordered) dictionary:: > using dict; > let d::dict = dict ["foo"=>77,"bar"=>99.1]; > keys d; vals d; members d; ["bar","foo"] [99.1,77] ["bar"=>99.1,"foo"=>77] Indexing a dictionary works in the usual way, using Pure's :func:`\!` operator. An :cons:`out_of_bounds` exception is thrown if the key is not in the dictionary:: > d!"foo"; 77 > d!"baz"; , line 5: unhandled exception 'out_of_bounds' while evaluating 'd!"baz"' By virtue of the prelude, slicing a dictionary with :func:`\!\!` also works as expected:: > d!!["foo","bar","baz"]; [77,99.1] A hashed dictionary can be used with any key values, which are stored in a seemingly random order:: > let h::hdict = hdict [foo=>77,42=>99.1]; > keys h; vals h; members h; [42,foo] [99.1,77] [42=>99.1,foo=>77] > h!foo; 77 > h!!keys h; [99.1,77] Multidicts work in pretty much the same fashion, but allow more than one value for a given key to be stored in the dictionary. In this case, the indexing operation returns a list of all values for the given key, which may be empty if the key is not in the dictionary (rather than throwing an :cons:`out_of_bounds` exception):: > let d::mdict = mdict ["foo"=>77,"bar"=>99.1,"foo"=>99]; > d!"foo"; d!"baz"; [77,99] [] Slicing thus returns a list of lists of values here:: > d!!["foo","bar","baz"]; [[77,99],[99.1],[]] To obtain a flat list you can just concatenate the results:: > cat $ d!!["foo","bar","baz"]; [77,99,99.1] Hashed multidicts provide both key hashing and multiple values per key:: > let h::hmdict = hmdict [foo=>77,42=>99.1,42=>77]; > keys h; vals h; members h; [42,42,foo] [99.1,77,77] [42=>99.1,42=>77,foo=>77] > h!42; [99.1,77] There are also some set-like operations which allow you to add/remove the members (``key=>val`` pairs) of one dictionary to/from another dictionary, and to compute the intersection of two dictionaries. For instance:: > let h1 = hmdict [a=>1,b=>2]; > let h2 = hmdict [b=>2,c=>3]; > members (h1+h2); [a=>1,c=>3,b=>2,b=>2] > members (h1-h2); [a=>1] > members (h1*h2); [b=>2] It's possible to mix dictionaries of different types in these operations. The necessary conversions are handled automatically:: > let h1 = hmdict [a=>1,b=>2]; > let h2 = hdict [b=>3,c=>4]; > members (h1+h2); [a=>1,c=>4,b=>2,b=>3] Note that the result will always be promoted to the most general operand type in such cases (a hashed multidict in the above example). If this is not what you want, you'll have to apply the necessary conversions manually:: > members (hdict h1+h2); [a=>1,c=>4,b=>3] .. module:: set Sets and Bags ------------- The set.pure module implements Pure's set data types based on AVL trees. These work pretty much like dictionaries (cf. Dictionaries_) but only store keys (called "elements" or "members" here) without any associated data values. Hence sets provide membership tests like dictionaries, but no indexing operations. There are four variations of this data structure to choose from, depending on whether the set members are ordered or hashed, and whether multiple instances of the same element are allowed (in this case the set is actually called a *multiset* or a *bag*). .. type:: set /type bag /type These implement the ordered set types. They require that members be ordered, i.e., the predicate ``<`` must be defined on them. .. type:: hset /type hbag /type These implement the hashed set types which don't require an order of the members. Distinct members are stored in an apparently random order. .. type:: xset /type This is just an abstract supertype for matching any kind of set or bag provided by this module. The usual comparison predicates (:func:`==`, :func:`~=`, :func:`<=`, :func:`<` etc.) are defined on all set and bag types, where two sets or bags are considered "equal" (``m1==m2``) if they both contain the same elements, and ``m1<=m2`` means that ``m1`` is a subset or subbag of ``m2``, i.e., all elements of ``m1`` are also contained in ``m2`` (taking into account multiplicities in the multiset case). Ordered sets and bags compare elements using equality (considering two elements ``a`` and ``b`` to be equal if neither ``a let m::set = set [5,1,3,11,3]; > members m; [1,3,5,11] > map (member m) (1..5); [1,0,1,0,1] > members $ m+set (3..6); [1,3,4,5,6,11] > members $ m-set (3..6); [1,11] > members $ m*set (3..6); [3,5] The bag operations work in a similar fashion, but multiple instances are permitted in this case, and each instance counts as a separate member:: > let m::bag = bag [5,1,3,11,3]; > members m; [1,3,3,5,11] > members $ delete m 3; [1,3,5,11] > members $ insert m 1; [1,1,3,3,5,11] > members $ m+bag (3..6); [1,3,3,3,4,5,5,6,11] > members $ m-bag (3..6); [1,3,11] > members $ m*bag (3..6); [3,5] As already mentioned, operands of different types can be mixed with the infix operators; the necessary conversions are handled automatically. E.g., here's how you add a set to a bag:: > let m1::bag = bag [5,1,3,11,3]; > let m2::set = set (3..6); > members (m1+m2); [1,3,3,3,4,5,5,6,11] Note that the result will always be promoted to the most general operand type in such cases (a bag in the above example). If this is not what you want, you'll have to apply the necessary conversions manually:: > members (set m1+m2); [1,3,4,5,6,11] If set members aren't ordered then you'll get an exception when trying to create an ordered set or bag from them:: > set [a,b,c]; , line 5: unhandled exception 'failed_cond' while evaluating 'set [a,b,c]' In such a case hashed sets and bags must be used instead. These work analogously to the ordered sets and bags, but distinct members are stored in an apparently random order:: > members $ hset [a,b,c] * hset [c,d,e]; [c] > members $ hbag [a,b,c] + hbag [c,d,e]; [a,c,c,b,d,e] .. module:: system System Interface ================ This module offers some useful system routines, straight from the C library, as well as some convenience functions for wrapping these up in Pure. Even the "purest" program needs to do some basic I/O every once in a while, and this module provides the necessary stuff to do just that. The operations provided in this module should work (if necessary by a suitable emulation) on all supported systems. Most of the following functions are extensively documented in the C library manual pages, so we concentrate on the Pure-specific aspects here. Imports ------- To use the operations of this module, add the following import declaration to your program:: using system; Some functions of the system interface are provided in separate modules; see `Regex Matching`_, `Additional POSIX Functions`_ and `Option Parsing`_. .. Errno and Friends ----------------- .. function:: errno set_errno n perror msg strerror n This value and the related routines are indispensable to give proper diagnostics when system calls fail for some reason. Note that, by its very nature, :func:`errno` is a fairly volatile value, don't expect it to survive a return to the command line in interactive sessions. Example:: > using system; > fopen "junk" "r", perror "junk"; junk: No such file or directory fopen "junk" "r" .. POSIX Locale ------------ .. function:: setlocale category locale Set or retrieve the current locale. Details are platform-specific, but you can expect that at least the categories :const:`LC_ALL`, :const:`LC_COLLATE`, :const:`LC_CTYPE`, :const:`LC_MONETARY`, :const:`LC_NUMERIC` and :const:`LC_TIME` are defined, as well as the following values for the locale parameter: ``"C"`` or ``"POSIX"`` (the default POSIX locale), ``""`` (the system default locale), and :const:`NULL`, to just query the current locale. Other string values which can be passed as the locale argument depend on the implementation, please check your local setlocale(3) documentation for details. If locale is not :const:`NULL`, the current locale is changed accordingly. The return value is the new locale, or the current locale when passing :const:`NULL` for the locale parameter. In either case, the string returned by :func:`setlocale` is such that it can be passed to :func:`setlocale` to restore the same locale again. In case of an error, :func:`setlocale` fails (rather than returning a null pointer). Please note that calling this function alters the Pure interpreter's idea of what the current locale is. When the interpreter starts up, it always sets the default system locale. Unless your scripts rely on a specific encoding, setting the locale to either ``"C"`` or ``""`` should always be safe. Example:: > setlocale LC_ALL NULL; "en_US.UTF-8" .. Signal Handling --------------- .. function:: trap action sig Establish or remove Pure signal handlers. The action parameter of :func:`trap` can be one of the predefined integer values :const:`SIG_TRAP`, :const:`SIG_IGN` and :const:`SIG_DFL`. :const:`SIG_TRAP` causes the given signal to be handled by mapping it to a Pure exception of the form ``signal sig``. :const:`SIG_IGN` ignores the signal, :const:`SIG_DFL` reverts to the system's default handling. See ``show -g SIG*`` for a list of known signal values on your system. Note: When the interpreter runs interactively, most standard termination signals (:const:`SIGINT`, :const:`SIGTERM`, etc.) are already set up to report corresponding Pure exceptions; if this is not desired, you can use :func:`trap` to either ignore these or revert to the default handlers instead. See :ref:`Exception Handling` in the Pure Manual for details and examples. .. Time Functions -------------- The usual date/time functions from the C library are all provided. This includes some functions to retrieve wallclock and cpu time which usually offer much better resolution than the venerable :func:`time` function. .. function:: time Reports the current time in seconds since the `epoch`, 00:00:00 UTC, Jan 1 1970. The result is always a bigint (in fact, the :func:`time` value is already 64 bit on many OSes nowadays). .. function:: gettimeofday Returns wallclock time as seconds since the epoch, like :func:`time`, but theoretically offers resolutions in the microsec range (actual resolutions vary, but are usually in the msec range for contemporary systems). The result is returned as a double value (which also limits precision). This function may actually be implemented through different system calls, depending on what's available on the host OS. .. function:: clock Returns the current CPU (not wallclock) time since an arbitrary point in the past, as a machine int. The number of "ticks" per second is given by the :const:`CLOCKS_PER_SEC` constant. Note that this value will wrap around approximately every 72 minutes. .. function:: sleep t nanosleep t Suspend execution for a given time interval in seconds. :func:`sleep` takes integer (int/bigint) arguments only and uses the ``sleep()`` system function. :func:`nanosleep` also accepts double arguments and theoretically supports resolutions down to 1 nanosecond (again, actual resolutions vary). This function may actually be implemented through different system calls, depending on what's available on the host OS. Both functions usually return zero, unless the sleep was interrupted by a signal, in which case the time remaining to be slept is returned. Examples:: > time,sleep 1,time; 1270241703L,0,1270241704L > gettimeofday,nanosleep 0.1,gettimeofday; 1270241709.06338,0.0,1270241709.16341 Here's a little macro which lets you time evaluations:: def timex x = y,(t2-t1)/CLOCKS_PER_SEC when t1 = clock; y = x; t2 = clock; end; Example:: > timex (foldl (+) 0 (1..100000)); 705082704,0.07 .. function:: tzset Initialize timezone information. .. variable:: tzname timezone daylight The timezone information. The :func:`tzset` function calls the corresponding routine from the C library and initializes the (Pure) variables :var:`tzname`, :var:`timezone` and :var:`daylight` accordingly. See the tzset(3) manual page for details. This routine is also called automatically when the system module is loaded, so you only have to invoke it to get up-to-date information after changes to the locale or the timezone. Example:: > tzset; () > tzname, timezone, daylight; ["CET","CEST"],-3600,1 > tzname!daylight; "CEST" .. The following functions deal with date/time values in string and "broken-down" time format. See the ctime(3), gmtime(3), localtime(3), mktime(3), asctime(3), strftime(3) and strptime(3) manual pages for details. .. function:: ctime t Convert a time value as returned by the :func:`time` function to a string in local time. .. function:: gmtime t localtime t Convert a time value to UTC or local time in "broken-down" form (a static pointer to a ``tm`` struct containing a bunch of ``int`` fields) which can then be passed to the :func:`asctime` and :func:`strftime` functions, or to :func:`int_matrix` if you want to convert the data to a matrix; see the example below. .. function:: mktime tm Converts broken-down time to a time value (seconds since the epoch). As with :func:`time`, the result is always a bigint. .. function:: asctime tm strftime format tm Format broken-down time as a string. :func:`strftime` also uses a format string supplied by the user, see below for a list of the most important conversion specifiers. .. function:: strptime s format tm Parse a date/time string ``s`` according to the given format (using more or less the same format specifiers as the :func:`strftime` function) and store the broken-down time result in the given ``tm`` struct. This function may fail, e.g., if :func:`strptime` finds an error in the format string. Otherwise it returns the part of the string which wasn't processed, see the example below. Examples:: > let t = time; t; 1270239790L > let tm = localtime t; tm; # > mktime tm; 1270239790L > asctime tm; "Fri Apr 2 22:23:10 2010\n" > int_matrix 9 tm; {10,23,22,2,3,110,5,91,1} > strftime "%c" tm; "Fri 02 Apr 2010 10:23:10 PM CEST" > strptime ans "%c" tm, int_matrix 9 tm; "CEST",{10,23,22,2,3,110,5,91,1} In the above example, :func:`strptime` was given a static pointer to a ``tm`` struct returned by :func:`localtime`. This always works, but in some situations it may be preferable to allocate dynamic storage instead. This storage should be properly initialized (zeroed out) before passing it to :func:`strptime`, since :func:`strptime` only stores the values specified (at least in principle; please consult your local C library documentation for details). Also note that while POSIX only specifies nine ``int`` fields in a ``tm`` struct, depending on the host operating system the struct may contain additional public and private fields. The actual size of a ``tm`` struct is given by the :const:`SIZEOF_TM` constant, so a safe way to allocate suitable dynamic storage for the :func:`strptime` function is as follows:: > let tm = pointer_cast "int*" $ calloc 1 SIZEOF_TM; > strptime "4/2/10" "%D" tm, int_matrix 9 tm; "",{0,0,0,2,3,110,5,91,0} Instead of explicitly allocating dynamic storage and converting it to a Pure matrix later, you can also invoke :func:`strptime` directly with an int matrix of sufficient size:: > let tm = imatrix (SIZEOF_TM div SIZEOF_INT + 1); > strptime "4/2/10" "%D" tm, take 9 tm; "",{0,0,0,2,3,110,5,91,0} Last but not least, to make calling :func:`strptime` more convenient, you can supply your own little wrapper function which takes care of allocating the storage, e.g.:: mystrptime s format = s,take 9 tm when tm = imatrix (SIZEOF_TM div SIZEOF_INT + 1); s = strptime s format tm; end; > mystrptime "4/2/10" "%D"; "",{0,0,0,2,3,110,5,91,0} Here is a list of some common format specifiers which can be used with the :func:`strftime` and :func:`strptime` routines. These are all specified by POSIX and should thus be available on most platforms. Note that many more formats are usually supported than what is listed here, so please consult your local manual pages for the complete list. * ``%d``, ``%m``, ``%y``: Day of the month, month and year as decimal two-digit numbers. * ``%Y``: The year as a four-digit number which includes the century. * ``%H``, ``%M``, ``%S``: Hours (range ``00`` to ``23``), minutes and seconds as decimal two-digit numbers. * ``%I``: The hours on a 12-hour clock (range ``01`` to ``12``). The following formats are locale-dependent: * ``%a``, ``%A``: Abbreviated and full weekday name. * ``%b``, ``%B``: Abbreviated and full month name. * ``%p``: AM or PM. ``%P`` is the same in lowercase (``strftime`` only). There are also some useful meta-formats which specify various combinations of the above: * ``%c``: The preferred date and time representation for the current locale. * ``%D``: The American date format (``%m/%d/%y``). * ``%F``: The ISO 8601 date format (``%Y-%m-%d``). (This is generally supported by :func:`strftime` only, but :func:`strptime` from GNU libc has it.) * ``%r``: The time in AM/PM notation (``%I:%M:%S %p``). * ``%R``: The time in 24-hour notation (``%H:%M``). * ``%T``: The time in 24-hour notation, including seconds (``%H:%M:%S``). In addition, ``%%`` denotes a literal ``%`` character, ``%n`` newlines and ``%t`` tabs. (For :func:`strptime` the latter two are synonymous and match arbitrary whitespace.) Windows users should note that :func:`strptime` isn't natively supported there. A basic emulation is provided by the Pure runtime, but at present this only supports the C locale. .. Process Functions ----------------- The following process functions are available on all systems. (Some additional process-related functions such as :func:`fork`, :func:`kill`, :func:`wait` and :func:`waitpid` are available in the :mod:`posix` module, see `Additional POSIX Functions`_.) .. function:: system cmd Execute a shell command. .. function:: execv prog argv execvp prog argv execve prog argv envp Execute a new process. ``prog`` denotes the name of the executable to be run, ``argv`` the argument vector (which repeats the program name in the first component), and ``envp`` a vector of environment strings of the form ``"var=value"``. The :func:`execv` function executes the program ``prog`` exactly as given, while :func:`execvp` also performs a path search. The :func:`execve` function is like :func:`execv`, but also specifies an environment to be passed to the process. In either case, the new process replaces the current process. For convenience, both ``argv`` and ``envp`` can be specified as a Pure string vector or a list, which is automatically translated to the raw, :const:`NULL`-terminated C string vectors (i.e., ``char**``) required by the underlying C functions. .. function:: spawnv mode prog argv spawnvp mode prog argv spawnve mode prog argv envp Spawn a new child process. These work like the corresponding MS Windows functions; on Un*x systems this functionality is implemented using a combination of :func:`fork` and :func:`execv`. The arguments are the same as for the :func:`execv` functions, except that there's an additional ``mode`` argument which specifies how the process is to be executed: :const:`P_WAIT` waits for the process to finish, after which :func:`spawnv` returns with the exit status of the terminated child process; :const:`P_NOWAIT` makes :func:`spawnv` return immediately, returning the process id; and :const:`P_OVERLAY` causes the child process to replace its parent, just like with :func:`execv`. (On Windows, there's an additional :const:`P_DETACH` flag which works like :const:`P_NOWAIT` but also turns the child process into a background task.) Note that, in addition, the prelude provides the :func:`exit` function which terminates the program with a given exit code, cf. `Other Special Primitives`_. Examples:: > system "pwd"; /home/ag/svn/pure-lang/trunk/pure/lib 0 > spawnvp P_WAIT "pwd" ["pwd"]; /home/ag/svn/pure-lang/trunk/pure/lib 0 > spawnv P_WAIT "/bin/sh" ["/bin/sh","-c","pwd"]; /home/ag/svn/pure-lang/trunk/pure/lib 0 .. Basic I/O Interface ------------------- Note that this module also defines the standard I/O streams :var:`stdin`, :var:`stdout` and :var:`stderr` as variables on startup. These are ready to be used with the operations described below. Also note that for convenience some of the following routines are actually Pure wrappers, rather than just providing the raw C library routines. .. variable:: stdin stdout stderr The standard I/O streams. .. function:: fopen name mode popen cmd mode Open a file or a pipe. These take care of closing a file object automagically when it's garbage-collected, and fail (instead of returning a null pointer) in case of error, so that you can provide any desired error handling simply by adding suitable equations. .. function:: fdopen fd mode Associates a file object with a given existing file descriptor. Otherwise works like :func:`fopen`, so the resulting file is closed automatically when it's garbage-collected. .. function:: freopen path mode fp Reopens a file object. The existing file object is closed. Otherwise works like :func:`fopen`, so the resulting file is closed automatically when it's garbage-collected. .. function:: fclose fp pclose fp Close a file or a pipe. .. function:: tmpfile Creates a unique temporary file (opened in ``"w+b"`` mode) which gets deleted automatically when it is closed or the file object gets garbage-collected. .. function:: feof fp ferror fp clearerr fp Check the end-of-file and error bits. :func:`clearerr` clears the error bit. .. function:: fileno fp Returns the file descriptor associated with the given file. .. function:: fflush fp Flushes the given file (or all open files if ``fp`` is :const:`NULL`). .. function:: fgets fp gets Pure wrappers for the C ``fgets`` and ``gets`` functions which handle the necessary buffering automatically. .. function:: fget fp A variation of :func:`fgets` which slurps in an entire text file at once. .. function:: fputs s fp puts s Output a string to the given file or :var:`stdout`, respectively. These are just the plain C functions. Note that :func:`puts` automatically adds a newline, while :func:`fputs` doesn't. Hmm. .. function:: fread ptr size nmemb fp fwrite ptr size nmemb fp Binary read/writes. Here you'll have to manage the buffers yourself. See the corresponding manual pages for details. .. function:: fseek fp offset whence ftell fp rewind fp Reposition the file pointer and retrieve its current value. The constants :const:`SEEK_SET`, :const:`SEEK_CUR` and :const:`SEEK_END` can be used for the ``whence`` argument of :func:`fseek`. The call ``rewind fp`` is equivalent to ``fseek fp 0 SEEK_SET`` (except that the latter also returns a result code). See the corresponding manual pages for details. .. function:: setbuf fp buf setvbuf fp buf mode size Set the buffering of a file object, given as the first argument. The second argument specifies the buffer, which must be a pointer to suitably allocated memory or :const:`NULL`. The ``mode`` argument of :func:`setvbuf` specifies the buffering mode, which may be one of the predefined constants :const:`_IONBF`, :const:`_IOLBF` and :const:`_IOFBF` denoting no buffering, line buffering and full (a.k.a. block) buffering, respectively; the ``size`` argument denotes the buffer size. For :func:`setbuf`, the given buffer must be able to hold :const:`BUFSIZ` characters, where :const:`BUFSIZ` is a constant defined by this module. ``setbuf fp buf`` is actually equivalent to the following call (except that :func:`setvbuf` also returns an integer return value):: setvbuf fp buf (if null buf then _IONBF else _IOFBF) BUFSIZ Please see the setbuf(3) manual page for details. Examples:: > puts "Hello, world!"; Hello, world! 14 > map fileno [stdin,stdout,stderr]; [0,1,2] > let fp = fopen "/etc/passwd" "r"; > fgets fp; "at:x:25:25:Batch jobs daemon:/var/spool/atjobs:/bin/bash\n" > fgets fp; "avahi:x:103:104:User for Avahi:/var/run/avahi-daemon:/bin/false\n" > ftell fp; 121L > rewind fp; () > fgets fp; "at:x:25:25:Batch jobs daemon:/var/spool/atjobs:/bin/bash\n" > split "\n" $ fget $ popen "ls *.pure" "r"; ["array.pure","dict.pure","getopt.pure","heap.pure","math.pure", "matrices.pure","prelude.pure","primitives.pure","quasiquote.pure", "set.pure","strings.pure","system.pure",""] .. C-style formatted I/O is provided through the following wrappers for the C ``printf`` and ``scanf`` functions. These wrapper functions take or return a tuple of values and are fully type-safe, so they should never segfault. All basic formats derived from ``%cdioux``, ``%efg``, ``%s`` and ``%p`` are supported, albeit without the standard length modifiers such as ``h`` and ``l``, which aren't of much use in Pure. (However, in addition to C ``printf`` and ``scanf``, the Pure versions also support the modifiers ``Z`` and ``R`` of the GMP_ and MPFR_ libraries, which are used for converting multiprecision integer and floating point values, as shown in the examples below.) .. _GMP: http://gmplib.org .. _MPFR: http://www.mpfr.org .. function:: printf format args fprintf fp format args Print a formatted string to :var:`stdout` or the given file, respectively. Normally, these functions return the result of the underlying C routines (number of characters written, or negative on error). However, in case of an abnormal condition in the wrapper function, such as argument mismatch, they will throw an exception. (In particular, an :cons:`out_of_bounds` exception will be thrown if there are not enough arguments for the given format string.) .. function:: sprintf format args Print a formatted string to a buffer and return the result as a string. Note that, unlike the C routine, the Pure version just returns the string result in the case of success; otherwise, the error handling is the same as with :func:`printf` and :func:`fprintf`. The implementation actually uses the C routine ``snprintf`` for safety, and a suitable output buffer is provided automatically. .. function:: scanf format fscanf fp format Read formatted input from :var:`stdin` or the given file, respectively. These normally return a tuple (or singleton) with the converted values. An exception of the form ``scanf_error ret``, where ``ret`` is the tuple of successfully converted values (which may be less than the number of requested input items), is thrown if end-of-file was met or another error occurred while still reading. The handling of other abnormal conditions is analogous to :func:`printf` et al. Also note that this implementation doesn't accept any of the standard length modifiers; in particular, floating point values will *always* be read in double precision and you just specify ``e``, ``g`` etc. for these. The "assignment suppression" flag ``*`` is understood, however; the corresponding items will not be returned. .. function:: sscanf s format This works exactly like :func:`fscanf`, but input comes from a string (first argument) rather than a file. Examples:: > do (printf "%s%d\n") [("foo",5),("catch",22)]; foo5 catch22 () > sscanf "foo 5 22" "%s %d %g"; "foo",5,22.0 As mentioned above, special argument formats are provided for bigints and multiprecision floats:: > sscanf "a(5) = 1234" "a(%d) = %Zd"; 5,1234L > sprintf "a(%d) = %Zd" ans; "a(5) = 1234" > using mpfr; > mpfr_set_default_prec 113; () > printf "pi = %0.30Rg\n" (4*atan (mpfr 1)); pi = 3.14159265358979323846264338328 37 There are a number of other options for these conversions, please check the GMP_ and MPFR_ documentation for details. .. note:: In contrast to bigints, multiprecision floats aren't directly supported by the Pure language. If you would like to use these numbers, you'll have to install the :mod:`mpfr` addon module which is not included in the standard library yet. Also note that, at the time of this writing, MPFR_ only provides formatted output, so multiprecision floats are not supported by the ``scanf`` functions. To work around this limitation, it is possible to read the number as a string and then convert it using the :func:`mpfr` function. .. Stat and Friends ---------------- .. function:: stat path Return information about the given file. This is a simple wrapper around the corresponding system call, see the stat(2) manual page for details. The function returns a tuple with the most important fields from the ``stat`` structure, in this order: ``st_dev``, ``st_ino``, ``st_mode``, ``st_nlink``, ``st_uid``, ``st_gid``, ``st_rdev``, ``st_size``, ``st_atime``, ``st_mtime``, ``st_ctime``. Among these, ``st_mode``, ``st_nlink``, ``st_uid`` and ``st_gid`` are simple machine integers, the rest is encoded as bigints (even on 32 bit platforms). .. function:: lstat path Return information about the given symbolic link (rather than the file it points to). On systems where this function isn't supported (e.g., Windows), :func:`lstat` is identical to :func:`stat`. .. function:: fstat fp Return information about the given file object. Same as :func:`stat`, but here the file is given as a file pointer created with :func:`fopen` (see `Basic I/O Interface`_ above). Note that the corresponding system function actually takes a file descriptor, so the Pure implementation is equivalent to the C call ``fstat(fileno(fp))``. This function might not be supported on all platforms. For average applications, the most interesting fields are ``st_mode`` and ``st_size``, which can be retrieved with ``stat filename!![2,7]``. Note that to facilitate access to the ``st_mode`` field, the usual masks and bits for file types (:const:`S_IFMT`, :const:`S_IFREG`, etc.) and permissions (:const:`S_ISUID`, :const:`S_ISGID`, :const:`S_IRWXU`, etc.) are defined as constants by this module. Use the command ``show -g S_*`` in the interpreter to get a full list of these. Other interesting fields are ``st_atime``, ``st_mtime`` and ``st_ctime``, which can be accessed using ``stat filename!!(8..10)``. The values of these fields are the times of last access, last modification and creation, respectively, which can be decoded using the appropriate time functions like :func:`ctime` or :func:`strftime`, see `Time Functions`_. Examples:: > stat "/etc/passwd"; 64773L,9726294L,33188,1,0,0,0L,1623L,1250373163L,1242692339L,1242692339L > stat "/etc/passwd"!7; // file size 1623L > strftime "%c" $ localtime $ stat "/etc/passwd"!10; // creation time "Tue 19 May 2009 02:18:59 AM CEST" > sprintf "0%o" $ stat "/etc/passwd"!2 and not S_IFMT; // permissions "0644" > stat "/etc/passwd"!2 and S_IFMT == S_IFREG; // this is a regular file 1 > stat "/etc"!2 and S_IFMT == S_IFDIR; // this is a directory 1 .. Reading Directories ------------------- .. function:: readdir name Read the contents of the given directory and return the names of all its entries as a list. Example:: > readdir "/home"; ["ag",".",".."] .. Shell Globbing -------------- .. function:: fnmatch pat s flags Returns a simple truth value (1 if ``pat`` matches ``s``, 0 if it doesn't), instead of an error code like the C function. .. function:: glob pat flags Returns a Pure list with the matches (unless there is an error in which case the integer result code of the underlying C routine is returned). The available flag values and glob error codes are available as symbolic :const:`FNM_*` and :const:`GLOB_*` constants defined as variables in the global environment. See the fnmatch(3) and glob(3) manpages for the meaning of these. Example:: > glob "*.pure" 0; ["array.pure","dict.pure","getopt.pure","heap.pure","math.pure", "matrices.pure","prelude.pure","primitives.pure","set.pure", "strings.pure","system.pure"] .. Regex Matching -------------- .. module:: regex Please note that, as of Pure 0.48, this part of the system interface is not included in the system module any more, but is provided as a separate regex module which can be used independently of the system module. To use the operations of this module, add the following import declaration to your program:: using regex; Since the POSIX regex functions (``regcomp`` and ``regexec``) have a somewhat difficult calling sequence, this module provides a couple of rather elaborate high-level wrapper functions for use in Pure programs. These are implemented in terms of a low-level interface provided in the runtime. (The low-level interface isn't documented here, but these functions are also callable if you want to create your own regular expression engines in Pure. You might wish to take a look at the implementation of the high-level functions in regex.pure to see how this can be done.) .. function:: regex pat cflags s eflags Compiles and matches a regex in one go, and returns the list of submatches (if any). :param string pat: the regular expression pattern :param int cflags: the compilation flags (bitwise or of any of the flags accepted by regcomp(3)) :param string s: the subject string to be matched :param int eflags: the matching execution flags (bitwise or of any of the flags accepted by regexec(3)) Symbolic :var:`REG_*` constants are provided for the different flag values, see the regcomp(3) manpage for an explanation of these. (Please note that these symbolic "constants" aren't really constants, but are actually implemented as variables, since their values may depend on which underlying regex library is being used. Please check `Perl Regex Compatibility`_ below for details.) Two particularly important compilation flags (to be included in the ``cflags`` argument) are :var:`REG_NOSUB`, which prevents submatches to be computed, and :var:`REG_EXTENDED`, which switches :func:`regex` from "basic" to "extended" regular expressions so that it understands all the regular expression elements of egrep(1) in the pattern argument. Depending on the flags and the outcome of the operation, the result of this function can take one of the following forms: - ``regerr code msg``: This indicates an error during compilation of the pattern (e.g., if there was a syntax error in the pattern). ``code`` is the nonzero integer code returned by ``regcomp``, and ``msg`` is the corresponding error message string, as returned by ``regerror``. You can redefine the :func:`regerr` function as appropriate for your application (e.g., if you'd like to print an error message or throw an exception). - ``0`` or ``1``: Just a truth value indicates whether the pattern matched or not. This will be the form of the result if the :var:`REG_NOSUB` flag was specified for compilation, indicating that no submatch information is to be computed. - ``0`` (indicating no match), or ``1`` (indicating a successful match), where the latter value is followed by a tuple of ``(pos,substr)`` pairs for each submatch. This will be the form of the result only if the :var:`REG_NOSUB` flag was *not* specified for compilation, so that submatch information is available. Note that, according to POSIX semantics, a return value of 1 does *not* generally mean that the entire subject string was matched, unless you explicitly tie the pattern to the beginning (``^``) and end (``$``) of the string. If the result takes the latter form, each ``(pos,substr)`` pair indicates a portion of the subject string which was matched; ``pos`` is the position at which the match starts, and ``substr`` is the substring (starting at position ``pos``) which was matched. The first ``(pos,substr)`` pair always indicates which portion of the string was matched by the entire pattern, the remaining pairs represent submatches for the parenthesized subpatterns of the pattern, as described on the regcomp(3) manual page. Note that some submatches may be empty (if they matched the empty string), in which case a pair ``(pos,"")`` indicates the (nonnegative) position ``pos`` where the subpattern matched the empty string. Other submatches may not participate in the match at all, in which case the pair ``(-1,"")`` is returned. .. The following helper functions are provided to analyze the result returned by :func:`regex`. .. function:: reg_result res Returns the result of a :func:`regex` call, i.e., a :func:`regerr` term if compilation failed, and a flag indicating whether the match was successful otherwise. .. function:: reg_info res Returns the submatch info if any, otherwise it returns ``()``. .. function:: reg n info Returns the ``n``\ th submatch of the given submatch info, where ``info`` is the result of a :func:`reg_info` call. .. function:: regs info Returns all valid submatches, i.e., the list of all triples ``(n,p,s)`` for which ``reg n == (p,s)`` with ``p>=0``. .. In addition, the following convenience functions are provided to perform global regex searches, to perform substitutions, and to tokenize a string according to a given delimiter regex. .. function:: regexg f pat cflags s eflags Perform a global regular expression search. This routine will scan the entire string for (non-overlapping) instances of the pattern, applies the given function ``f`` to the ``reg_info`` for each match, and collects all results in a list. Note: Never specify the :var:`REG_NOSUB` flag with this function, it needs the submatch info. .. function:: regexgg f pat cflags s eflags This works like :func:`regexg`, but allows overlapping matches. .. function:: regsub f pat cflags s eflags Replaces all non-overlapping instances of a pattern with a computed substitution string. To these ends, the given function ``f`` is applied to the :func:`reg_info` for each match. The result string is then obtained by concatenating ``f info`` for all matches, with the unmatched portions of the string in between. To make this work, ``f`` must always return a string value; otherwise, :func:`regsub` throws a :cons:`bad_string_value` exception. .. function:: regsplit pat cflags s eflags Splits a string into constituents delimited by substrings matching the given pattern. .. Please note that these operations all operate in an eager fashion, i.e., they process the entire input string in one go. This may be unwieldy or at least inefficient for huge amounts of text. As a remedy, the following lazy alternatives are available: .. function:: regexgs f pat cflags s eflags regexggs f pat cflags s eflags regsplits pat cflags s eflags These work like :func:`regexg`, :func:`regexgg` and :func:`regsplit` above, but return a stream result which enables you to process the matches one by one, using "call by need" evaluation. .. Basic Examples ~~~~~~~~~~~~~~ Let's have a look at some simple examples:: > let pat = "[[:alpha:]][[:alnum:]]*"; > let s = "1var foo 99 BAR $%&"; Simple match:: > regex pat 0 s 0; 1,1,"var" Same without match info:: > regex pat REG_NOSUB s 0; 1 Global match, return the list of all matches:: > regexg id pat 0 s 0; [(1,"var"),(5,"foo"),(12,"BAR")] Same with overlapping matches:: > regexgg id pat 0 s 0; [(1,"var"),(2,"ar"),(3,"r"),(5,"foo"),(6,"oo"),(7,"o"),(12,"BAR"), (13,"AR"),(14,"R")] Note that :func:`id` (the identity function) in the examples above can be replaced with an arbitrary function which processes the matches. For instance, if we only want the matched strings instead of the full match info:: > regexg (!1) pat 0 s 0; ["var","foo","BAR"] Lazy versions of both :func:`regexg` and :func:`regexgg` are provided which return the result as a stream instead. These can be processed in a "call by need" fashion:: > regexgs id pat 0 s 0; (1,"var"):# > last ans; 12,"BAR" Let's verify that the processing is really done lazily:: > using system; > test x = printf "got: %s\n" (str x) $$ x; > let xs = regexgs test pat 0 s 0; got: 1,"var" > xs!1; got: 5,"foo" 5,"foo" > last xs; got: 12,"BAR" 12,"BAR" As you can see, the first match is produced immediately, while the remaining matches are processed as the result stream is traversed. This is most useful if you have to deal with bigger amounts of text. By processing the result stream in a piecemeal fashion, you can avoid keeping the entire result list in memory. For instance, compare the following:: > let s2 = fget $ fopen "system.pure" "r"; > stats -m > #regexg id pat 0 s2 0; 7977 0.18s, 55847 cells > #regexgs id pat 0 s2 0; 7977 0.12s, 20 cells Regex Substitutions and Splitting ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We can also perform substitutions on matches:: > regsub (sprintf "<%d:%s>") pat 0 s 0; "1<1:var> <5:foo> 99 <12:BAR> $%&" Or split a string using a delimiter pattern (this uses an egrep pattern):: > let delim = "[[:space:]]+"; > regsplit delim REG_EXTENDED s 0; ["1var","foo","99","BAR","$%&"] > regsplit delim REG_EXTENDED "The quick brown fox" 0; ["The","quick","brown","fox"] The :func:`regsplit` operation also has a lazy variation:: > regsplits "[[:space:]]+" REG_EXTENDED "The quick brown fox" 0; "The":# > last ans; "fox" Empty Matches ~~~~~~~~~~~~~ Empty matches are permitted, too, subject to the constraint that at most one match is reported for each position (which also prevents looping). And of course an empty match will only be reported if nothing else matches. For instance:: > regexg id "" REG_EXTENDED "foo" 0; [(0,""),(1,""),(2,""),(3,"")] > regexg id "o*" REG_EXTENDED "foo" 0; [(0,""),(1,"oo"),(3,"")] > regexgg id "o*" REG_EXTENDED "foo" 0; [(0,""),(1,"oo"),(2,"o"),(3,"")] This also works when substituting or splitting:: > regsub (cst " ") "" REG_EXTENDED "some text" 0; " s o m e t e x t " > regsub (cst " ") " ?" REG_EXTENDED "some text" 0; " s o m e t e x t " > regsplit "" REG_EXTENDED "some text" 0; ["","s","o","m","e"," ","t","e","x","t",""] > regsplit " ?" REG_EXTENDED "some text" 0; ["","s","o","m","e","","t","e","x","t",""] Submatches ~~~~~~~~~~ Parenthesized subexpressions in a pattern yield corresponding submatch information, which is useful if we need to retrieve the text matched by a given subexpression. For instance, suppose we want to parse environment lines, such as those returned by the shell's ``set`` command. These can be dissected using the following regex:: > let env_pat = "^([^=]+)=(.*)$"; > let env_flags = REG_EXTENDED or REG_NEWLINE; > regex env_pat env_flags "SHELL=/bin/sh" 0; 1,0,"SHELL=/bin/sh",0,"SHELL",6,"/bin/sh" Note that we again used an extended regex here, and we also added the :var:`REG_NEWLINE` flag so that we properly deal with multiline input. The desired information is in the 4th and 6th element of the submatch info, we can retrieve that as follows:: > parse_env s = regexg (\info -> info!3 => info!5) env_pat env_flags s 0; > parse_env "SHELL=/bin/sh\nHOME=/home/bar\n"; ["SHELL"=>"/bin/sh","HOME"=>"/home/bar"] We can get hold of the real process environment as follows:: > using system; > let env = parse_env $ fget $ popen "set" "r"; > #env; 109 > head env; "BASH"=>"/usr/bin/sh" Just for the fun of it, let's convert this to a record, providing easy random access to the environment variables:: > let env = record env; > env!!["SHELL","HOME"]; {"/bin/bash","/home/ag"} Perl Regex Compatibility ~~~~~~~~~~~~~~~~~~~~~~~~ Pure 0.64 and later can be built with support for Perl-style regular expressions in the runtime. This is disabled by default, but you can build the interpreter with the ``--with-pcre`` configure option to enable it. You need to have the pcreposix library installed to make that work, see http://www.pcre.org/. Once this option is enabled, Pure's regex operations will work as discussed above, except that they will now understand Perl-style regular expressions, as implemented by the libpcre library, instead of the (much more limited) POSIX syntax. For instance, you can now write:: > using regex; > regex "(?:Bob says: (\\w+))" 0 "Bob says: Go" 0; 1,0,"Bob says: Go",10,"Go" Note that in Perl-style regexes the ``(?:...)`` construct indicates a non-capturing group, so that the above invocation returns just a single submatch for the second ``(\w+)`` group. A discussion of Perl regexes is beyond the scope of this manual, so you may want to refer to http://www.rexegg.com/ for more information or read a good book on the subject. Pure scripts can detect whether Perl regexes are enabled by inspecting the value of the :var:`pcre_version` variable. This variable will only be defined if the interpreter was built with the ``--with-pcre`` configure option, in which case its value is the version number of the libpcre library as a string. Please note that enabling this option will change the meaning of some constructs in the regular expression syntax, even if you don't actually use any of the Perl-specific extensions. It's possible to write Pure scripts which work with either libpcre or the default (POSIX) regex library, but you need to be aware of the discrepancies. The most notable differences are that :var:`REG_EXTENDED` is always enabled and the treatment of newlines is different in some situations if :var:`REG_NEWLINE` is used; please check the pcreposix(3) manual page for details. Also, the :var:`REG_*` "constants" differ between libpcre and the POSIX regex functions, so you should never hard-code these into batch-compiled scripts (simply avoid :keyword:`const` definitions involving these values, then you should be fine). .. Additional POSIX Functions -------------------------- .. module:: posix :platform: Mac, Unix The posix module provides some additional POSIX functions not available on all supported systems. (In particular, none of these functions are provided on MS Windows.) You can load this module in addition to the system module if you need the additional functionality. To use the operations of this module, add the following import declaration to your program:: using posix; The following operations are provided. Please see the appropriate POSIX manual pages for a closer description of these functions. .. function:: fork Fork a new process. .. function:: getpid getppid Get the process id of the current process and its parent process, respectively. .. function:: wait status waitpid pid status options Wait for any child process, or the given one. The ``status`` argument must be a pointer to an ``int`` value, which is used to return the status of the child process. .. function:: kill pid sig Send the given signal to the given process. .. function:: raise sig Raise the given signal in the current process. .. function:: pause Sleep until a signal is caught. .. module:: getopt Option Parsing -------------- This is a quick-and-dirty replacement for the GNU getopt functions, ported from the Q library. To use the operations of this module, add the following import declaration to your program:: using getopt; The following operation is provided: .. function:: getopt opts args Parse options as given by ``opts`` in the command line arguments ``args``, return the parsed options along with a list of the remaining (non-option) command line arguments. The :func:`getopt` function takes two arguments: ``opts``, a list of option descriptions in the format described below, and ``args``, a list of strings containing the command line parameters to be parsed for options. The result is a pair ``(opts_return,args_return)`` where ``opts_return`` is a list of options and their values, and ``args_return`` is the list of remaining (non-option) arguments. Options are parsed using the rules of GNU getopt(1). If an invalid option is encountered (unrecognized option, missing or extra argument, etc.), :func:`getopt` throws the offending option string as an exception. The ``opts_return`` value is a list of "hash pairs" ``opt=>val`` where ``opt`` is the (long) option name (as given by the ``long_opt`` field given in the ``opts`` argument, see below) and ``val`` is the corresponding value (``()`` if none). Note that this format is ready to be passed to the :func:`dict` or :func:`hdict` function, cf. Dictionaries_, which makes it easy to retrieve option values or check for the presence of options. (As of Pure 0.41, you can also just convert the list to a record and employ the record functions to access the option data, cf. `Record Functions`_.) The ``opts`` argument of ``getopt`` must be a list of triples ``(long_opt, short_opt, flag)``, where ``long_opt`` denotes the long option, ``short_opt`` the equivalent short option, and ``flag`` is one of the symbolic integer values :const:`NOARG`, :const:`OPTARG` and :const:`REQARG` which specifies whether the option has no argument, an optional argument or a required argument, respectively. Either ``long_opt`` or ``short_opt`` should be a string value of the form ``"--abc"`` or ``"-x"``, respectively. Note that since the ``long_opt`` value is always used to denote the corresponding option in the ``opts_return`` list, you always have to specify a sensible value for that field. If no separate long option name is needed, you can specify the same value as in the ``short_opt`` field, or some other convenient value (e.g., an integer) which designates the option. Conversely, to indicate that an option has no short option equivalent, simply specify an empty option string for the ``short_opt`` field. Examples:: > let opts = [("--help", "-h", NOARG), // no argument > ("--version", "", NOARG), // no short option > ("--filename", "-f", REQARG), // required argument > ("--count", "-n", OPTARG)]; // optional argument > getopt opts ["foo", "-h", "--filename", "bar", "-n0", "baz"]; ["--help"=>(),"--filename"=>"bar","--count"=>"0"],["foo","baz"] > catch invalid_option $ getopt opts ["-h","-v"]; invalid_option "-v" > getopt opts [foo, "-h", bar]; ["--help"=>()],[foo,bar] As the last example shows, non-option arguments (as well as option values specified as separate arguments) can actually be any values which are just copied to the result lists as is.