Version 0.13, April 11, 2018
Albert Graef <aggraef@gmail.com>
This module lets you load and run Faust-generated signal processing modules in Pure. Faust (an acronym for Functional AUdio STreams) is a functional programming language for real-time sound processing and synthesis developed at Grame and distributed as GPL’ed software.
Note
As of Pure 0.45, there’s also built-in support for Faust interoperability in the Pure core, including the ability to inline Faust code in Pure programs; see Interfacing to Faust in the Pure manual. The built-in Faust interface requires a recent Faust version (2.0 or later, denoted using the “Faust2” moniker in the following). Both interfaces provide pretty much the same basic capabilities and should work equally well for most applications. In fact, as of version 0.5 pure-faust comes with a compatibility module which provides the pure-faust API on top of the built-in Faust interface, see the description of the faust2 module below for details.
Unless explicitly stated otherwise, this software is Copyright (c) 2009-2012 by Albert Graef. Please also see the source for the copyright and license notes pertaining to individual source files.
pure-faust is free software: you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
pure-faust is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.
Get the latest source from https://github.com/agraef/pure-lang/releases/download/pure-faust-0.13/pure-faust-0.13.tar.gz
Binary packages can be found at https://agraef.github.io/pure-lang/. To install from source, run the usual make && sudo make install. This requires Pure, of course (the present version will work with Pure 0.52 and later). The Makefile tries to guess the installation prefix under which Pure is installed. If it guesses wrong, you can tell it the right prefix with make prefix=/some/path. Or you can specify the exact path of the lib/pure directory with make libdir=/some/path; by default the Makefile assumes $(prefix)/lib/pure. The Makefile also tries to guess the host system type and set up some platform-specific things accordingly. If this doesn’t work for your system then you’ll have to edit the Makefile accordingly.
The Faust compiler is not required to compile this module, but of course you’ll need it to build the examples in the examples subdirectory and to compile your own Faust sources. You’ll need Faust 0.9.46 or later.
To compile Faust programs for use with this module, you’ll also need the pure.cpp architecture file. This should be included in recent Faust releases. If your Faust version doesn’t have it yet, you can find a suitable version of this file in the examples folder. Simply copy the file to your Faust library directory (usually something like /usr/local/lib/faust, /usr/local/share/faust with the latest Faust versions) or the directory holding the Faust sources to be compiled, and you should be set.
Once Faust and this module have been installed as described above, you should be able to compile a Faust dsp to a shared module loadable by pure-faust as follows:
$ faust -a pure.cpp -o mydsp.cpp mydsp.dsp
$ g++ -shared -o mydsp.so mydsp.cpp
Note that, by default, Faust generates code which does all internal computations with single precision. You can add the -double flag to the Faust command in order to use double precision instead. (In either case, all data will be represented as doubles on the Pure side.)
Also note that the above compile command is for a Linux or BSD system using gcc. Add -fPIC for 64 bit compilation. For Windows compilation, the output filename should be mydsp.dll instead of mydsp.so; on Mac OSX, it should be mydsp.dylib. There’s a Makefile and a shell script in the examples folder which both automate this process; the latter will also be included in recent Faust releases. Using the shell script, you can compile a Faust dsp simply as follows:
$ faust2pure mydsp.dsp
This will also print the name of the compiled module on stdout.
Once the module has been compiled, you can fire up the Pure interpreter and load the dsp as follows:
> using faust;
> let dsp = faust_init "mydsp" 48000;
> dsp;
#<pointer 0xf09220>
The faust_init function loads the "mydsp.so" module (the .so suffix is supplied automatically) and returns a pointer to the Faust dsp object which can then be used in subsequent operations.
Note
faust_init only loads the dsp module if it hasn’t been loaded before. However, as of pure-faust 0.8, faust_init also checks the modification time of the module and reloads it if the module was recompiled since it was last loaded. (This is for compatibility with Pure’s built-in Faust interface which behaves in the same way.) If this happens, all existing dsp instances created with the old version of the module become invalid immediately (i.e., all subsequent operations on them will fail, except faust_exit) and must be recreated.
The second parameter of faust_init, 48000 in this example, denotes the sample rate in Hz. This can be an arbitrary integer value which is available to the hosted dsp (it’s up to the dsp whether it actually uses this value in some way). The sample rate can also be changed on the fly with the faust_reinit function:
> faust_reinit dsp 44100;
It is also possible to create copies of an existing dsp with the faust_clone function, which is quite handy if multiple copies of the same dsp are needed (a case which commonly arises when implementing polyphonic synthesizers):
> let dsp2 = faust_clone dsp;
When you’re done with a dsp, you can invoke the faust_exit function to unload it (this also happens automatically when a dsp object is garbage-collected):
> faust_exit dsp2;
Note that after invoking this operation the dsp pointer becomes invalid and must not be used any more.
In the following, we use the following little Faust program as a running example:
declare descr "amplifier";
declare author "Albert Graef";
declare version "1.0";
gain = nentry("gain", 1.0, 0, 10, 0.01);
process = *(gain);
The faust_info function can be used to determine the number of input/output channels as well as the “UI” (a data structure describing the available control variables) of the loaded dsp:
> let n,m,ui = faust_info dsp;
Global metadata of the dsp is available as a list of key=>val string pairs with the faust_meta function. For instance:
> faust_meta dsp;
["descr"=>"amplifier","author"=>"Albert Graef","version"=>"1.0"]
To actually run the dsp, you’ll need two buffers capable of holding the required number of audio samples for input and output. For convenience, the faust_compute routine lets you specify these as Pure double matrices. faust_compute is invoked as follows:
> faust_compute dsp in out;
Here, in and out must be double matrices which have at least n or m rows, respectively (corresponding to the number of input and output channels of the Faust dsp). The row size of these matrices determines the number of samples which will be processed (if one of the matrices has a larger row size than the other, the extra elements are ignored). The out matrix will be modified in-place and also returned as the result of the call.
Some DSPs (e.g., synthesizers) only take control input without processing any audio input; others (e.g., pitch detectors) might produce just control output without any audio output. In such cases you can just specify an empty in or out matrix, respectively. For instance:
> faust_compute dsp {} out;
Most DSPs take additional control input. The control variables are listed in the “UI” component of the faust_info return value. For instance, suppose that there’s a gain parameter listed there, it might look as follows:
> controls ui!0;
hslider #<pointer 0x12780a4> [] ("gain",1.0,0.0,10.0,0.1)
The constructor itself denotes the type of control, which matches the name of the Faust builtin used to create the control (see the Faust documentation for more details on this). The third parameter is a tuple which indicates the arguments the control was created with in the Faust program. The first parameter is a C double* which points to the current value of the control variable. You can inspect and change this value with the get_double and put_double routines available in the Pure prelude. (Note that, for compatibility with the internal Faust interface which supports both single and double precision controls, you can also use the get_control and put_control functions instead.) Changes of control variables only take effect between different invocations of faust_compute. Example:
> let gain = control_ref (controls ui!0);
> get_double gain;
1.0
> put_double gain 2.0;
()
> faust_compute dsp in out;
Output controls such as hbargraph and vbargraph are handled in a similar fashion, only that the Faust dsp updates these values for each call to faust_compute and Pure scripts can then read the values with get_double or get_control.
The second parameter of a control description is a list holding the Faust metadata of the control. This list will be empty if the control does not have any metadata. Otherwise you will find some of key=>val string pairs in this list. It is completely up to the application how to interpret the metadata, which may consist, e.g., of GUI layout hints or various kinds of controller definitions. For instance, a MIDI controller assignment might look as follows in the Faust source:
gain = nentry("gain[midi:ctrl 7]", 1.0, 0, 10, 0.01);
In Pure this information will then be available as:
> control_meta (controls ui!0);
["midi"=>"ctrl 7"]
Let’s finally have a closer look at the contents of the UI data structure. You will find that it is actually a tree, similar to the directory tree of a hierarchical file system, which reflects the layout of the controls in the Faust program. For instance:
> ui;
vgroup [] ("mydsp",[nentry #<pointer 0x12780a4> [] ("gain",1.0,0.0,10.0,0.01)])
The leaves of the tree are the actual controls, while its interior nodes are so-called “control groups”, starting from a root node which represents the entire dsp. There are different kinds of control groups such as vgroup and hgroup; please check the Faust documentation for details. Control groups have a name and metadata just like individual controls, but there is no control_ref component and the data stored at the node is the list of controls and subgroups contained in the control group. The controls function returns a flat representation of the controls in the UI tree as a list, omitting the group nodes of the tree:
> controls ui;
[hslider #<pointer 0x12780a4> [] ("gain",1.0,0.0,10.0,0.1)]
We’ve already employed this function above to extract the gain control of our example dsp. There’s a variation of this function which yields the full “pathnames” of controls in the UI tree:
> pcontrols ui;
[hslider #<pointer 0x12780a4> [] ("mydsp/gain",1.0,0.0,10.0,0.1)]
This is sometimes necessary to distinguish controls with identical names in different control groups. There are two additional convenience functions which work with this flat representation of the UI data structure:
> let ctrls = ans;
> control_map ctrls;
{"mydsp/gain"=>#<pointer 0x12780a4>}
> control_metamap ctrls;
{"mydsp/gain"=>[]}
The results are Pure records which provide convenient access to the pointers and metadata of the controls by their name.
Please note that, as of Pure 0.45, the UI access functions described above are actually provided by the faustui standard library module which gets included by the faust module.
Further examples can be found in the examples subdirectory.
As of version 0.5, pure-faust includes a Faust2 compatibility module which lets you use the pure-faust API on top of Pure’s new Faust bitcode interface, using the same operations as described under Usage above. This module is invoked with the following import clause:
using faust2;
To instantiate a Faust dsp using the faust2 interface, you’ll have to compile the Faust program to LLVM bitcode format. The easiest way to do this is to use the faust2pure script with the -bitcode option. Please see the Interfacing to Faust section in the Pure manual for details.
Note that only one of the faust and faust2 modules may be imported into a program; trying to use both modules in the same program will not work. Also note that the faust2 module requires Faust2 and a fairly recent Pure version to work, whereas the faust module works with both current Faust (Faust2) and older Faust versions and doesn’t rely on the Faust bitcode loader (only the pure.cpp architecture is needed).
Many thanks to Yann Orlarey at Grame, the principal author of Faust!